x86 PC 苹果Mac OS X 106 雪豹系统安装指南.pdfVIP

Part 1 Preparation This guide’s intention is to get Snow Leopard installed on your system and to configure the base hardware. It was made on my system using the following hardware. GA-EP45-DS3L Rev 1 BIOS F11c. Intel Core2Duo E7300 4GB DDR 800Mhz nVidia 8800GT 512MB 2 x 500GB SATA II Hard Drives SATA II DVD- RW USB Keyboard Mouse. If you have different hardware then you will probably experience some differences and if you want to use additional devices for example Wi-Fi or Firewire PCI cards then that will be for you to work out how to get them functioning. But I recommend doing that after this install is complete. Requ rements • GA-EP45-DS3L • for 64-bit you need a CPU with SSE3. So all core 2 duos quads extremes. • SATA HDDs SATA DVD drive. • Purchased Retail Mac OS X 10.6 install DVD (not the restore DVD you get with Apple hardware). • USB keyboard Mouse. • nVidia video card (if you use an ATi card then see note below). • My Support Files. • An existing 10.5 installation can be useful but not essential as long as the BootCD works for you. • 8GB USB memory stick (if the BootCD option doesn’t work for you). • A spare HDD. Note: ATI V deo cards If you have an ATI video card then please read the following pages before attempting this install. ATI page http:// /?cat=7 PC EFI page http:// /?cat=5 I only have experience with using an nVidia card and I don’t know the current state of ATI support with OS X. If you need to use PC-EFI for ATI support then where ever you find reference to Chameleon boot file you will need to replace it with the PC-EFI boot file. Back in September 2009 bero followed this install guide using a Radeon 4870 and PC-EFI. Things might well have changed since then but you can read his post for reference. /forum/ index.php?showtopic=180954st=1140p=1276687#entry1276687 H nts It might help to have the intended install HDD connected to SATA port 0. Cred t fragreaver /forum/