电气论文PLC与MCGS在铸造生产线电气系统中的运用.docVIP

PLC与MCGS在铸造生产线电气系统中的运用 专业班级： 学生姓名： 指导教师： 职 称： 摘要 本文主要是关于铸造厂不锈钢生产线上小车的控制问题，主要实现的功能有：控制过渡小车的速度，实现小车的前进和后退、正反转与刹车，反馈信号等。整个系统可以实现手动、自动化功能。运用MCGS组态软件设计模拟运行界面。根据设计要求设置对应元件属性，建立MCGS与PLC的通信，对整个生产线系统的各个功能进行模拟运行，实现对整个生产线控制系统的优化。 本设计采用MCGS触摸屏作为人机界面，通过串口与PLC交换数据，实现输入操作与数据显示；通过MCGS软件进行模拟，清晰地将系统反映在触摸屏上；通过PLC实现电机的动作流程，并使用旋钮、按钮来实现手、自动和电机动作顺序，并根据需要通过延时控制来实现机电一体化。 在实现工艺的基础上，通过电机的功率来选各元器件的型号，利用AutoCAD设计电气控制系统的总体方案，使用西门子编程软件S7-300设计其主要控制功能，给出硬件电路原理图和软件程序编程。 关键词：生产线 PLC MCGS 系统 PLC and MCGS in casting production line of electrical systems use Abstract This paper is mainly about the foundry production line for stainless steel control prob- lem of the car. It mainly realizes the function: to control the speed of the car transition, realize the car back and forward, and reversing and brake, feedback signals, etc. This paper is mainly about the foundry production line for stainless steel control problem of the car. The whole system can achieve manually, automation function. Use MCGS software design simulation operation interface. According to the design requirements set corresponding element attribute, build the communication with PLC MCGS, to the whole production line system of each function operation simulation, and to realize the optimization of the whole production line control system. This design USES the MCGS touch screen as man-machine interface, through a serial port and PLC exchange data, realize the operations and data shows input; Through the MCGS software simulation, clearly will be reflected in the touch screen system; Through the PLC motor action process, and use the knobs and buttons to realize the hand, automatic and motor action sequence, and according to need through the delay to realize control electromechanical integration. On the basis of realization process, through the motor of the power to choose each component model, using AutoCAD design the overall scheme of the electrical control