zhch外文翻译.docVIP

毕业设计（论文） 译文及原稿 译文题目 原稿题目 原稿 参 考 文 献 [1] Okamoto, I., Takahashi, A., Sugiura, H., Yamada, N., and Mori, T., 1988, “Computer Aided Design and Evaluation System for Stamping Dies at Toyota”. SAE Publication:Advances and Trends in Automotive Sheet Steel Stamping, 206, pp. 79-89. [2] Zhou, L., Hu, S.J., Lin, G. and Stoughton, T., 2009,“Evolutionary Stamping Die Development Using Morphing Technology”, accepted by Transactions of the NAMRI/SME, 37. [3] Kobayashi, S., Oh, S. and Altan, T., 1989, “Metal Forming and the Finite-Element Method”, Oxford University Press [4] Saran, M. J., Schedin, E., Samuelsson, A., Melander, A.and Gustafsson, C., 1990, “Numerical and Experimental Investigations of Deep Drawing of Metal Sheets”, Journal of Engineering for Industry, 112, pp. 272-277 [5] Chen, F. K. and Chiang, B. H., 1998, “Three-Dimensional Finite Element Analysis for the Stamping of a Motorcycle Oil Tank”, Transactions of the ASME. Journal of Manufacturing Science and Engineering, 120, pp. 770-3. [6] Lin, G., Li, J., Hu, S. J., and Cai, W, 2007, “A Computational Response Surface Study of Three- Dimensional Aluminum Hemming Using Solid-to-Shell Mapping”, Transactions of the ASME. Journal of Manufacturing Science and Engineering. 129, pp. 360-8. [7] Chung, K. and Richmond, O., 1992, “Ideal forming I:Homogeneous deformation with minimum plastic work”,International Journal of Mechanical Sciences, 34, pp. 575-591. [8] Chung, K. and Richmond, O., 1992, “Ideal forming II:Sheet forming with optimum deformation”, International Journal of Mechanical Sciences, 34, pp. 617-633. [9] Chung, K. and Richmond, O., 1994, “Mechanics of ideal forming”, Journal of Applied Mechanics, 61, pp. 176-181. [10] Chung, K., Barlat, F., Brem, J. C., Lege, D. J. And Richmond, O., 1997, “Blank shape design for a planar anisotropic sheet based on ideal forming design theory and FEM analysis”, International Journal of Mechanical Sciences, 39(1), pp. 105-120. [11] Guo, Y. Q., Batoz, J. L., Detraux, J. M