110KV电力系统继电保护设计1推荐.docVIP

毕业设计（论文） 题 目： 110KV电力系统继电保护设计 学 院： 电子信息学院 专业班级：电气工程及其自动化2班ABSTRACT The design task is to reflect on the subjects of the professional knowledge levels, while testing the professional learning outcomes. First, according to the requirements of graduation, to establish a rational system, this graduation design to the proposed 110KV transformer substation as an example. Secondly, according to the main content of graduation, on the 110KV power system relay protection, relay protection according the principle of conservation of the chosen sensitivity setting and checking, determine the protection program. The graduation project is divided into six chapters, the first chapter describes an overview of power system protection, including the brief history of relay protection, relay protection, the role of the basic requirements of relay protection, relay protection of the basic principles of composition and classification, a brief description of the basic situation of the power system protection; second chapter of the main substation is a load analysis, the number of main transformers, capacity, winding connections, and cooling methods to determine, finally, determination of main electrical wiring ; The third chapter is the system short-circuit current calculation, including the concept of short-circuit current, type of short circuit current purposes of the calculation and short circuit current per unit value calculation method; fourth Zhang line protection, including the Principle of line protection, protection setting calculations and sensitivity of calibration, the system uses single-phase short circuit test current power network protection, including Current Protection, a time limit for over-current protection, simple and practical; Chapter transformer protection, including the principle of transformer protection, protection setting calculations and the sensitivity of school experience, the main protection is used in dif