基于单片机的数字多用表的设计推荐.pdf

基于单片机的数字多用表的设计 摘 要 近十几年来，单片机技术的发展极为迅速，广泛应用于生产、生活的各个领 域。从测量领域来看，一部分电子测量仪表在高速化、精确化方面有了明显的进 步。电子测量仪表精确度的高低，直接影响着企业的经济效益。在我国现有经济 水平下，使用单片机开发的电子测量仪表，测量精确而且性价比极高，不仅适用 于电压、电流、电阻等的测量，还广泛适用于温度、湿度等测量场合。 本课题设计了一个基于单片机的数字多用表，这种数字多用表以单片机作为 数据处理主控芯片。首先，将输入的待测模拟信号经过A/D 转换模块，转换成 为单片机能够识别和处理的数字信号；然后，单片机对此数字信号进行数据处理； 最后，测量结果通过LED 显示模块显示出来。 本课题设计的数字多用表具有用途多、测量精确、性能稳定、携带方便等优 点，是电子测量中最常用的工具之一。它可以用来测量电压、电流、电阻等，操 作起来非常简单，而且还可以进行功能扩展。 关键词：单片机；电子测量；A/D 转换；LED 显示 I Abstract Over the last decades, the development of single chip technology is very fast and is widely used in production, all areas of life. From the measurement point of view, part of the electronic measuring instruments has significant progress in high speed. Precision electronic measuring instruments directly affects the economic efficiency of enterprises. In Chinas current economic level,electronic measuring instruments using microcontroller has accurate measurement and high cost, not only for voltage, current, resistance and other measurements, is also widely used in temperature and humidity measurement occasions. This project designed a microcontroller-based digital multimeter, digital multimeter such as data processing to the master microcontroller chip. First, the input analog signal under test through the A/D converter module, a microcontroller can recognize and convert the digital signal processing; then, this single chip digital signal processing; Finally, the measurement results are displayed through LED the display module. The project design has versatile digital multimeter, measurement precision, stable performance, easy to carry, etc, is the most commonly us