可逆反击锤式破碎机的设计毕业论文-应用文.docVIP

本科生毕业设计（论文） 反击锤式破碎机设计 esign of the Counter-hammer Crusher 中国矿业大学 2017年6月 Abstract Cyclonic static micro-bubble flotation is a new column separation method and device with China self-owned intellectual property. Reversible counter hammer crusher used in a large number of cement plants, power plants and other departments, so its design has a wide range of prospects and a wealth of experience can learn from. In this design, the development history, classification, hammer crusher principle, classification, structure and characteristics of the crusher are described. The parameter design of the main parts, the selection and calculation of the transmission, the design of the shaft and its parts Calculation, the installation of parts, positioning, and the strength of individual parts, life of the calculation, including the choice of spare parts, and hammer crusher rack design. In this paper, the structure, size and material of the counter hammer are improved locally, and the counterattack plate is optimized. The optimized counterattack plate can make full use of the crushing energy, and it is easy to replace and reduce the maintenance cost. The design of the crusher in the actual production makes the use of crushing equipment,Production capacity and safety factor has been greatly improved. There are 28 figures, 5 tables and 26 references in this article. Keywords: Counterattack hammer crusher; Hammer ; Counterattack plate; Crushing; Design and calculation 目录 摘要 Ι 目录 III 1 1.1课题研究的目的和意义 1 1.2破碎机的国内外研究概况 1 1.3碎煤行业发展状况 3 1.4反击锤式破碎机目前的国内外研究水平 8 1.5矿石的力学性能与破碎机的选择 9 2总体结构设计 11 2.1主要部件的介绍 11 2.2方案的确定设计 1 2.3给定的原始数据 15 2.4结构创新与改进 15 3机器的主要参数设计计算 16 3.1 主要参数的选择和相关设计 16 3.2主要工作参数的设计计算 18 4反击锤式破碎机主要结构的设计 20 4.1V带及带轮的设计 20 4. 25 4.3主轴的设计检验及其上零件设计 26 4.4部分零部件上的公差和配合 34 4.5锤头的设计 36 4.6锤子架与转盘尺寸 41 5反击锤式破碎机破碎腔与箱体 42 5.1破碎腔的设计 42 5.2蓖条位置调整弹簧的选择 44 5.3箱体的结构设计 44 5.4 肋板的设计 45 6机器安装维护 46