RHEL5U2上安装MARVELLYukon88E8056网卡驱动.doc

RHEL5U2上安装MARVELL Yukon 88E8056网卡驱动 原系统RHEL5U2，后换了主板，硬盘还在，系统能正常进入，但就是找不到网卡了。于是不想重新安装系统，便去找驱动来装了。新主板是ASUS P5BV-C，到官网下载了驱动，不过官网驱动只提供到RHEL4U4的，没有RHEL5的，但是我想问题不大。驱动只有400多KB，通过U盘copy到HDD上：先要找到USB盘在/dev下所对应的设备名称。有规律可循的，我的U盘对应的设备名是/dev/sdb，只有一个分区，相应的设备名是/dev/sdb1，于是：mount /dev/sdb1 /mnt (或者：mount -t vfat /dev/sdb1 /mnt,我的没有加-t参数) 将驱动包Marvell_LAN_CAP_Linux_105013.zip 拷贝到/tmp目录下，然后解压：unzip Marvell_LAN_CAP_Linux_105013.zipcd DriverInstall先看看README，解压后又个install.sh安装脚本，chmod +x install.sh./install.sh...错误提示： Check kernel header files (not found)??????????????????????????????? [ failed ]Kernel header not found. Please install the linux header filesdevelopment package or create a symbolic link from the/usr/src/KERNEL_VERSION directory to linux???? Example: ln -s /usr/src/KERNEL_VERSION /usr/src/linux按照提示一步步安装，到后提示找不到kernel header，因为找不到/usr/src目录下有kernel相关的文件夹。我看了下install.sh这个脚本，安装这个驱动是要去找内核目录下的相关头文件(应该是在include目录)。于是在REDHAT官方下载了kernel source：kernel-2.6.18-92.el5.src.rpm，当然你也可以到kernel.org去下载linux-2.6.18.tar.gz。 rpm -ivh kernel-2.6.18-92.el5.src.rpmcd /usr/src/redhat/SPECSrpmbuild --target i686 -bp kernel-2.6.spec会在/usr/src/redhat/BUILD生成kernel目录：/usr/src/redhat/BUILD/kernel-2.6.18下面这个目录才是kernel主目录($sourcedir)了：后面将会用到/usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686 原本以为按照上面的错误提示输入下面命令便能安装成功了：ln -s /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686 /usr/src/linux 但又出现下面的错误提示： The kernels modpost utility is not available. As the source codefor the utility is available in your current installed linux kernelsource tree, you can compile the utility for your own.To do so, please follow the description below:(Please read the next lines before you execute them!)[1] Change to /usr/src/linux[2] Call make (this begins to create a new linux kernel)[3] Take a look at the output: After a few seconds the modpost utility??? will be compiled[4] Now interrupt the make process by pressing ctrl-cThe modpost utility now is created. You can check this by taking a lookat /usr/s