通信系统工程设计.docVIP

摘要 在现代数字通信系统中，频带传输系统的应用最为突出。将原始的数字基带信号，经过频谱搬移，变换为适合在频带上传输的频带信号，传输这个信号的系统就称为频带传输系统。在频带传输系统中，根据数字信号对载波不同参数的控制，形成不同的频带调制方法 PSK调制电路的VHDL建模。PSK调制器模型主要由计数器和二选一开关等组成。计数器对外部时钟信号进行分频与计数，并输出两路相位相反的数字载波信号；二选一开关的功能是：在基带信号的控制下，对两路载波信号进行选通，输出的信号即为PSK信号。 关键词：频带传输 调制电路 simulink仿真  Abstract In the digital communication systems ,frequency range transport systems and application of the most outstanding. the original figures with the signal frequency and after the move, it is suitable for the transmitted signal frequency range. frequency range this signal, the transport system is called frequency range transport system. in frequency range transport system. according to figures signal to the carrier with the control of parameters and form different frequency range modulation. Psk modulation scheme. psk modulation vhdl modeling of the model mainly by the counter and the second choice of a switch, etc. the external the signal frequency and the count, and output two aspects of the carrier signal , secondary a switch are ： on the control of a signal, the road carrier signal to the output signal, the signal psk. The main purpose is in communication theory, mobile communications, a course of study on the basis of the theory, matlab and simulink communication system of simulation and students in communication theory and practice of emulation. the design and better understand and grasp a signal, the number of signal transmission systems, the number of transport system, with carrier wave by modulation to digital transmission system. Keywords ： frequency range transport modulation scheme simulink simulation  第一章 绪论 1.1 设计目地及意义 本次设计的主要目的是在通信原理、移动通信等理论课程学习的基础上，通过对通信系统的MATLAB、simulink仿真，加深学生对通信原理及仿真实践的理解。 通过此次设计，使学生更好的理解和掌握，模拟信号的数字传输系统，数字信号的基带传输系统，载波调制的数字传输系统。 1.2 设计的主要内容 ⑴ 模拟信号的数字传输部分，完成低通抽样定理的simulink仿真。 ⑵ 数字信号的基带传输部分，应用MATLAB完成降低码间串扰的脉冲波形的仿真。 ⑶ 载波调制的数字传输部分，对数字载波调制的相移键控调制方式进行MATLAB、simulink仿真，并比较两种方式。