量测系统评估作业指导书(02版).docVIP

CWT 清盛電子股份有限公司 部門：品保部 O.I.D OF MEASUREMENT SYSTEM ANALYSIS 量測系統評估作業指導書 編號：CWW-VQA-601 制訂日期 88/04/16 版本 02 頁數 2/14 1. Purpose目的： To evaluate the capability of measuring equipment / gauge. 評估儀器的量測能力。 2. Scope範圍： Applicable to CWT measuring equipment. 適用於所有CWT的量測儀器。 3. Responsibility 權責： 所有CWT量測儀器。 4. Definition 定義： 4.1 Gauge量具： Gauge mentioned in this document covers all measuring equipment , tools and meters which are used to measure or test process / product characters. 此文件所提到的量具 (gauge) , 泛指檢測製程或產品特性所用的量測儀器或工具而言。 4.2 Stability穩度： The difference between the observed average of measurements obtained with a gauge on the same master or master parts when measuring a single characteristic over an extended time period. 是指同一量測系統，在不同的時間量測同一工件的同一特性時，其平均值所產生的差異。 4.3 Accuracy準度： The difference between the observed average of measurements and the master value. The master value can be determined by averaging several measurements with the most accurate measuring equipment available. 是指量測之平均值與真值所產生的差異，如果真值不易取得，可挑選最精密的量測系統，並 以其量測平均值取代之。 4.4 Linearity線度： The difference in the accuracy values through the expected operation range of the gage. Common cause variability affecting linearity originates primarily from two sources：Accuracy and Repeatability. 是指量測系統在合理的工作區間內，其準度所產生的差異，一般而言準度和重複性會直接影 響線度的好壞。 4.5 R R重複性與重現性： Repeatability and reproducibility. gauge repeatability is the variation in measurements obtained when one operator used the same gauge for measuring the identical characteristics of the same parts. Gauge reproducibility is the variation in the average of measurements made by different operators using the same gauge when measuring identical characteristics of the same parts. @Controlled Document @Chant World Technology @Company Restricted CWT 清盛電子股份有限公司 部門：品保部 O.I.D OF MEASUREMENT SYSTEM ANALYSIS 量測系統