毕业设计（论文）-鸡蛋裂纹检测机构设计(含全套CAD图纸).doc

毕业设计 题 目 鸡蛋裂纹检测机购设计 学生姓名 学 号 系 部 专 业 班 级 指导教师 二〇一四年X月  摘要 蛋壳裂纹是禽蛋质量检测的重要指标之一。随着蛋制品加工产业各个环节的自动化和工业化的实现，传统人工的检测手段显然难以满足这种要求，快速、无损、精确的检测方法更加适合现代农业化发展的需求。 本设计一种鸡蛋裂纹检测机，本机的检测原理是敲击振动检测，鸡蛋通过输送装置经过敲击器敲击，产生振动，从而产生声音。声音信号经过麦克风输送到检测单元，检测单元通过判断不同的音波情况从而判断鸡蛋的好坏。本鸡蛋裂纹检测机机械机构包括，动力单元，传动系统，输送系统，敲击器和机架组成。动力单元提供动力，通过传动系统传递给输送系统，输送系统把鸡蛋输送到敲击器安装处进行检测。本文利用SOLIDWORKS软件对整个鸡蛋裂纹检测机整机进行三维建模，并导出二维工程图。 关键词：鸡蛋裂纹检测，输送系统，传动系统，三维建模  Abstract Eggshell crack is one of the important indicators of egg quality detection. With the implementation of each link of egg products processing industry automation and industrialization, the traditional artificial detection method is obviously difficult to meet this requirement, rapid, nondestructive, precise detection method is more suitable for modern agricultural development needs. The design of an egg crack detection machine, the detection principle of this machine is knocking vibration detection, egg by conveying device through the knocker percussion, vibration, thus produce sound. The sound signal through the microphone is transmitted to the detection unit, detection unit through the judgment of sonic conditions different to judge the quality of egg. The egg crack detection machine mechanism includes, power unit, transmission system, transmission system, a device and a frame. Power unit provides power, delivered to the delivery system through the transmission system, transmission system the egg conveying to detect knocking device installation. In this paper, the 3D modeling on the whole egg crack detection machine using the SOLIDWORKS software, and derive the two-dimensional engineering drawing. Keywords: egg crack detection, transmission system, transmission system, 3D modeling  目录 摘要 i Abstract ii 第一章 引言 1 1.1 课题研究的目的及意义 1 1.1.1 课题的目的 1 1.1.2 课题的意义 1 1.2课题的研究现状 2 1.3 课题设计思路 3 1.4 课题设计结构 3 第二章 鸡蛋裂纹检测机的总体设计方案 4 2.1鸡蛋裂纹检测机的组成及各部分关系概述 4 2.2 鸡蛋裂纹检测机的方案的确认 4 2.2.1 驱动方案的选择 4 2.2.2 传动方案的选取 4 2.2.3 总体方案拟定 5 第三章 鸡蛋检测机整体结构的设计计算 7 3.1 拟定