伺服机械压力机控制系统设计毕业设计论文资料.doc

学 号 毕 业 论 文 课 题 基于LabviewJ25-63型伺服机械压力机控制系统设计  摘 要 机械压力机用于对材料进行压力加工的机床，通过对坯件施加强大的压力使其发生变形和断裂来加工成零件。传统机械压力是采用用曲柄连杆或肘杆机构、凸轮机构、螺杆机构传动的锻压机械 控制系统是伺服机械压力机不可缺少的重要组成部分，如何更好地设计、制造和调试整个系统，确定其最佳参数，保证伺服机械压力具有很好的工作性能；因此本此毕业设计进行了J25-63型伺服机械压力机的控制系统的设计。 在研究现有先进控制方法的基础上，本文进行J25-63型伺服机械压力机的控制系统的设计 ，主要从位置伺服控制方案、落料工艺伺服控制曲线、伺服驱动模型建立及仿真等方面进行设计。 通过控制系统的仿真表明：本文所设计的控制系统完全满足伺服机械压力机的工作性能要求，使该机械压力机具有速度可调并且可以消除传统机械压力机具有下死点的缺点。 关键词：机械压力机 控制系统 伺服控制 Abstracts Mechanical presses for pressure on the material processing machine, through the blank to exert strong pressure on deformation and fracture to process into parts. Conventional mechanical pressure is used with connecting rod or toggle mechanism, cam mechanism, screw mechanism driving the forging machine, which features the work of a smooth, high precision work, good operating conditions, the relative merits of hydraulic machines with high productivity, it is widely used in automotive , shipping and other industries; However, the traditional press can not be adjusted with the speed, the presence of defects such as dead spots, and now demands a lot of pressure processing equipment, processing speed is the speed adjustable, adjustable servo speed so for the research of mechanical press significance. Mechanical presses for pressure on the material processing machine, blank imposed by powerful servo control system is indispensable mechanical press components, how to better design, manufacture and commissioning the entire system to determine the best parameters to ensure the servo-mechanical stress has a very good performance; therefore the design of this school were J25-63-type Servo press control system. In the study of existing advanced control methods, the paper for J25-63-type Servo press control system, mainly from the position servo control scheme, blanking servo control technology curve, servo-driven modeling and simulation in areas such as design. The simulation showed that by controlling the system: This article is designed