集成电路设计CAD_EDA工具实用教程教学课件作者韩雁第1章节典型电路仿真工具软件1-Spectre_Verilog数模混合仿真课件幻灯片.ppt

共27页 * Spectre–Verilog混合信号仿真 浙大微电子 韩雁 hany@zju.edu.cn 共27页 * 几家EDA软件公司 1、Cadence 2、Synopsys（收购Avanti） 3、Mentor Graphics 4、Silvaco 5、SpringSoft 共27页 * SPICE仿真器 SPICE : a general-purpose analog circuit simulator developed by the University of California, Berkeley. It is used for nonlinear DC, nonlinear transient, and linear AC analysis. Hspice: a general-purpose circuit simulator from Avanti. It has an extensive set of built-in device models, including models for small geometry MOSFETs and MESFETs. The program is compatible with SPICE input formats. Cadence supports a library of primitives and a full interface for Hspice. Spectre: SPICE-alike analog simulator developed by Cadence. 共27页 * 高精度模拟/射频电路仿真器 1、Spectre/SpectreRF (Cadence) 2、Hspice/HspiceRF (Synopsys) 3、Ads (Agilent 主要针对RF) 4、Eldo (Mentor Graphics) 5、Saber (Synopsys) 共27页 * 数模混合信号仿真器 1、Spectre-Verilog (Cadence) 2、SMASH (Dolphin Integration) 3、Eldo (Mentor Graphics) 4、Harmony (Silvaco) 5、Saber (Synopsys) Why Mixed-Signal Simulation? 共27页 * System in the Real World 共27页 * Mostly Applied Method of Mixed-Signal Design 系统分成若干个芯片，每个芯片分开设计，再经电路板整合。 或者用SoC实现。 共27页 * IntegratedMixed-Signal Design 共27页 * Mixed-Signal Simulator 的基本结构 以模拟电路仿真器为核心 在处理数模混合电路时将数字部分等效为相应的简化的模拟电路、或 者采用解析函数来表示逻辑模块的行为，然后对整个系统采用模拟电路 的方法进行模拟。优点：模拟结果精确、能处理的电路规模比较大，模 拟速度也有显著提高。缺点：比逻辑模拟器还是慢很多。 同时包含模拟和数字两个仿真核 处理速度快，能处理的电路规模极大，但需要解决模拟仿真核和数字 仿真核之间的通信问题；另外，由于数字逻辑仿真器和模拟仿真器的输 入、输出数据是不一样的，还必须在模拟仿真核和数字仿真核之间实现 模拟信号和数字信号的相互转换。 QA 共27页 * Creating Analog Block Create the schematic view of analog block, and create a symbol view for cell use 共27页 * Creating Digital Block 共27页 * Creating a Mixed-Signal Schematic 共27页 * Create Config View for Simulation The mixed-signal simulation hierarchy is controlled by Hierarchy-Editor which must be defined with config view cell name is top circuit name for simulation view name will be set as config Use Create New File to create a new config view with Hierarchy-Editor 共27页 * Set New Configuration 1.