毕业论文设计--2×25MW水电站电气部分课程设计_精品.doc

毕业论文设计--2×25MW水电站电气部分课程设计 The electrical design of 2 × 25MW hydropower station Student: Tutor: ABSTRACT The design is part of the hydropower plant electrical design. The total installed capacity of hydropower stations of 2 × 25 50 MW. High side is for 110 Kv, one is connected to the system,another is connected to an installed capacity of 100 MW power station. The stations largest power transmission for 50 MW, the power plants electricity plant was 0.2 percent. According to the raw data presented by the development of three main electric cable programmes, and these three options for reliability, economy and flexibility of comparison, the two retain a more reasonable proposal, the final through quantitative comparison of the technical and economic determine the final The main electric cable programme. In the system all the possible short-circuit fault analysis calculated on the basis of a conductor of electrical equipment and checking the choice of design. In the first systematic analysis of power plants on the basis of the distribution of power plant equipment layout, mine protection, protection and automatic devices, earlier system, monitoring system have done a preliminary simple design. The graduation is a process designed to combine theory and practice of the initial process, played apply what they have learned to consolidate and deepen their understanding of electrical engineering and automation professional understanding of the concept of a project designed to enhance the power systems ability to design role. KEY WORDS：The main electrical wiring, short-circuit current basis, the selection of equipment, power distribution equipment layout, mine protection, protection and automatic devices, earlier system, monitoring system 目录 摘要 1 ABSTRACT 2 第一部分 设计说明书 8 第一章 概述 8 1.1 本毕业设计的目的和要求 8 1.2 本毕业设计的内容 8 本次设计主要内容 8 本次设计最终的设计成品 9 1.3 本设计引用的规程和规范 9 第二章 电气主接线设计 10 2.1 对水电厂原始资料分析 10 原始资料 10 原始资料分析