Rofin-Sinar_Technologies__Inc我sinar_technologies__inc罗芬.pptVIP

Rofin-Sinar Technologies, Inc . ??? Rofin-Sinar Technologies, Inc.45701 Mast Street Plymouth, MI 48170-6008USAPhone: (734) 455-5400 website: LASERS AND FLEXIBLE PACKAGING Easy to open packages ?Increasing the shelf life of perishables? Any freeformscribing pattern Keeping barrierproperties intact Laser Macro - The Power of Light In both the cutting and welding of body parts, and the manufacture of vehicle components, the future belongs to innovative laser systems. Various thicknesses and qualities of metal sheet can be welded together to form tailored blanks, and laser seams can replace electric spot welds. Laser Flame Cutting In principle, the cutting of metals with the laser is effected by locally heating the material to above melting point at the focal point of the focused laser beam . The resulting smelt is ejected by a gas that is injected coaxially to the laser beam, so that an open cut is formed Laser Fusion Cutting Cutting in two dimensions, which is the most common case, is the domain of the CO2 laser, because it yields the best cost-benefit ratio Dieboards For this application CO2 lasers are used, because the beams of other types of laser are not absorbed by wood. It is the flexibility of laser cutting, coupled with the high degree of precision and quality of cut, that makes it interesting for this application Glass When cutting quartz glass, the advantages of the laser over traditional cutting processes lie in the absence of wear on the beam, which works contact-free. Furthermore, the laser technique creates a significantly improved quality of cut compared with other processes. IHT Cutting Internal high-pressure transformed (IHT) components are being used increasingly in automobile construction to achieve stiffness in bodies and components Plastics Thermoplastics can be cut by comparatively low-power CO2 lasers in the range of 100 to 300 Watts. Depending on the setup of the application, separation cuts or polishing cu