车床加工轴加工工艺设计.pdfVIP

The Machining Process Design of Lathe Transmission Shaft Class ：Mechatronic 1401 Name: 汪培义 Wang Peiyi 2017 年04 月28 日 目录 1.Background 3 2. The purpose of research 3 3. Content of the research 3 3.1 Analysis of Technical Requirements of Main Parts of Parts 3 3.2 Material and preparing a blank, A process and a heat treatment process 4 3.3 Processing process analysis 4 3.4 Determine the positioning criteria 4 3.6 Develop the transmission path of the drive shaft 5 4. Research Process 5 1.Background The geometrical accuracy of the part directly affects the performance of the part. The machined process is reasonable or not ，which will directly affect the machining accuracy of the part. A comprehensive engineering application training for the mechanics of the mechanics process is carried out for the lathe drive shaft application. 2. The purpose of research （1）Master the main part of the technical requirements of the analysis method. （2）The method of selecting the material of the parts and the preparation method and the process of determining the blank. （3）Master the process analysis method. （4）Grasp the selection method of positioning reference. （5）To master the principles and methods of making reasonable parts processing sequence. （6）Master the way to develop a reasonable part of the processing route. 3. Content of the research Figure 1 shows the drive shaft of the lathe, the shaft has a keyway for the installation of gear to transmit movement and power, both ends of the bearing is to install the bearing journal. To complete the mechanical parts of the drive shaft process design. The following is the process of design: 3.1 Analysis of Technical Requ