新型配式混凝土楼盖π式板缝连接节点抗剪性能研究.PDFVIP

新型配式混凝土楼盖π 式板缝连接节点抗剪性能研究* 庞 瑞 熊晓莉 蒋立峰 ( ， 450001) 河南工业大学土木建筑学院 郑州 : ， 摘 要 为研究新型全装配混凝土楼盖π 式板缝节点的平面内抗剪性能 进行了π 式板缝节点单调和 ， 、 － 低周反复荷载下的足尺试验 对π 式板缝节点的破坏过程及形态 荷载 变形曲线和耗能能力等进行了系统 。 : ， ， ; 研究 结果表明 两种荷载模式下 π 式板缝连接节点均发生了锚筋与锚板间的焊缝破坏 抗剪承载力较低 、 ; 节点滞回曲线捏拢现象较为严重 耗能能力和抗震性能较差 建议采用穿孔塞焊等方法来保证π 式连接件锚 T ， 。 筋与锚板 形焊的焊接质量 提高其抗剪能力 : ; ; ; 关键词 预制混凝土楼盖 π 式连接件 抗剪性能 破坏模式 DOI :10. 13204 /j． gyjz201408018 EXPEＲIMENTAL STUDY OF SHEAＲ CAPACITY OF π-SHAPE SLAB JOINTS IN PＲECAST ＲC DIAPHＲAGM Pang Ｒui Xiong Xiaoli Jiang Lifeng (College of Civil Engineering and Architecture ，Henan University of Technology ，Zhengzhou 450001 ，China) Abstract :An experimental study was conducted to evaluate the shear bearing capacity of π-shape slab joint connection used in new-type precast concrete floor diaphragm under monotonic and low-cycle loads． Failure process and mode ，load-displacement relationship curves ，energy dissipation capacity etc of the test specimens were investigated． And the test results showed that the shear bearing capacity of the π-shape connection was not ideal because of the weld fracture between anchor bar and steel plate under the said load condition． The hysteretic curves of π-shape connection shrank seriously ，which showed bad energy dissipation and seismic performance． It is suggested that piercing plug welding should be used to ensure the welding quality