Φ4×60m回转窑支承装置的毕业设计（可编辑）.docVIP

Φ4×60m回转窑支承装置的毕业设计 Design Of Φ 4×60m Supporting Device Of Rotary Kiln ABSTRACT Supporting device is an important part of rotary kiln, rotary kiln part weight cylinder, gear, wheel, brick, materials, and wheel can rotate smoothly on the riding wheel, which are supported by the device supporting device is consisted by the bearing, the bearing cover, bearing, lubrication and cooling the system composition.The main task of this project is to design a Nissan 2500 tons of rotary kiln supporting deviceIntroduces the characteristics of the supporting device of rotary kiln and the advantages of sliding bearing device compared with the rolling bearing, then according to the production requirements of Φ4×60 determining output 2500T, parameters are chosen for rotary kiln thickness, angle, speed, etc. by the three device. For the design of rotary kiln structure, focus on the structural design of the supporting part, consider repair, overload capacity, convenient maintenance and adjustment of the degree of difficulty, supporting device adopts the sliding bearing device. Assembly and parts drawing This topic through the design of access to relevant information,the previous and the experiential formula in the design to ensure their own design rationality,feasibility, practicality KEY WORDS: supporting device of rotary kiln,sliding bearing,structure,designII 洛阳理工学院毕业设计(论文) 目 录 前 言. 1 第 1 章 回转窑概述 3 1.1 概述 3 1.1.1 回转窑的应用3 1.1.2 回转窑及支承装置的工作原理及特点3 1.2 回转窑计算 4 1.2.1 相关参数的确定. 4 1.2.2 回转窑质量的计算 6 1.3 回转窑支承装置8 第 2 章 支承位置的设计及其计算. 9 2.1 回转窑支承位置的确定9 2.2 筒体弯矩计算 9 2.2.1 筒体弯矩计算 10 2.3 筒体支点反作用力11 2.3.1 筒体轴向力、径向力的计算. 11 2.3.2 求跨最大弯矩 11 2.4 筒体强度计算(不考虑支座沉陷)12 2.5 结 论13 第 3 章 支承装置机构. 14 3.1 垫板机构14 3.1.1 垫板的工作原理14 3.1.2 垫板的结构设计14 3.2 滚圈机构14 3.2.1 滚圈、托轮的材料选择15 3.2.2 滚圈、托轮的直径. 15 3.2.3 确定滚圈宽度 16 3.2.4 滚圈的接触应力校核 16 3.3 托轮宽度的确定 16 III 洛阳理工学院毕业设计(论文) 3.4 托轮轴 17 3.4.1 材料的选择. 17 3.4.2 托轮轴尺寸的确定. 18 3.4.3 弯矩计算19 3.5 挡轮的设计. 20 第 4 章 轴承选择及主要零件校核22 4.1 材料的选则. 22 4.2