UWI-400UNITOR说明.docVIP

UWI-400 welding inverter UWI-400 welding inverter Product Group: 191 Product number: 670398 General description A welding machine for electrode, TIG and MIG/MAG welding. Features Multi-function welding machine for stick electrode, TIG and wire welding Can be connected to any 3 phase primary voltage between 380 V and 440 V, frequency 50-60 Hz Automatic shut down function against input voltage, fluctuations outside ± 10% of rated voltage range Display information to operator on display stating reason for shut down Stepless current control from 5-400 A Hot start, arc force control and anti-stick functions Parallel connection for extra power (2xUWI-400) Fan on “demand” tunnel cooling Remote on/off and remote amperage control Conforms to code of safe working practices for merchant seamen Benefits Multi-functional Safe in use Efficient Technical data Welding current range 5-400 Open circuit voltage 63 V Duty cycle at max current 30 % Electric phase 3 Power supply voltage 380-440 V Power supply cycles 50/60 Hz Recommended fuses (slow) 20 A Certification (approval) CE IP protection 23 Weight 34.5 kg Length 492 mm Width 320 mm Height 400 mm Designed for marine applicationsA process selector switch provides quick and easy selection of optimal welding characteristics for all processes required for on board maintenance; electrode, TIG (with Lift Arc), wire welding and air carbon arc gouging.5-400A current range covers the use of any size of welding electrodes.Low weight and compact dimensions provide easy transport to wherever welding is needed. Designed for marine conditionsAutomatic shut down protecting against input voltage fluctuations or attempted overload. Display information to the operator stating reason for shut down. Specially designed tunnel cooling and high grade aluminium casing for optimal protection against salty corrosive atmosphere, dust and other atmospheric contamination. Fan on demand function can be used as needed; onboard repair welding i