ABPLC-变频器-触摸屏通信实例.docxVIP

This document will describe in detail how to configure and program the MicroLogix 1100 for ModBus communications to a PowerFlex 4/40 drive. This document will also illustrate communications via EtherNet to a PanelView Plus for control.该文件将详细描述如何配置和编程Modbus通信MicroLogix 1100控制器的PowerFlex 4 / 40驱动器。此文件也将说明通过以太网通讯的PanelView Plus为控制。Creation Date:11/30/2005Because of the variety of uses for this information, the user of and those responsible for applying this information must satisfy themselves as to the acceptability of each application and use of the program. In no event will Rockwell Automation be responsible or liable for indirect or consequential damages resulting from the use or application of this information.由于此信息的各种用途，对用户和负责应用此信息必须满足每个应用程序的可接受性和??使用程序。在任何情况下，罗克韦尔自动化公司负责或承担此信息的使用或应用程序造成的间接或相应损害The illustrations, charts and examples shown in this application note are intended solely to illustrate the principles of programmable controllers and some of the methods used to apply them. Particularly because of the many variables and requirements associated with any particular installation, Rockwell Automation cannot assume responsibility or liability for actual use based upon the illustrations used and applications.在本应用笔记中的插图，图表和例子的目的纯粹是为了说明可编程控制器的原理和一些用于应用它们的方法。特别是由于许多变数，并与任何特定的安装要求，罗克韦尔自动化公司可以不承担责任或法律责任根据所用的插图和应用的实际使用。Rockwell Automation assumes no patent liability with respect to use of information, circuits, equipment, or software described in this text.罗克韦尔自动化与信息，电路，设备，或在这个文本中描述的软件使用方面没有专利责任。Reproductions of the contents of this application note, in whole or in part, without the express written consent of Rockwell Automation are prohibited.本应用笔记的内容的复制品，没有罗克韦尔自动化公司的明确书面同意，全部或部分，是禁止的。Software and Firmware UsedAll examples shown were developed using RSLogix 500 v7.0 and RSView Studio v4.0软件和固件用例子所示，使用RSLogix 500 V7.0和RSView工作室V4.0Document Purpose This document is not a manual or training material, but an Application Note, which could be useful in helping a Rockwell