串口初始化函数1.pdfVIP

成都华邦电子技术服务有限公司 028 成都华邦电子技术服务有限公司 028 ============================== 适用于WINBOND的W77E58和W77E518 ============================== // 初始化CPU设置 void vCpuInitialize() { // CLOCK CONTROL: // ============== // Bit: 7 6 5 4 3 2 1 0 // WD1 WD0 T2M T1M T0M MD2 MD1 MD0 // // Mnemonic: CKCON Address: 8Eh // // WD1-0: Watchdog timer mode select bits: These bits determine the time-out // period for the watchdog timer. In all four time-out options the // reset time-out is 512 clocks more than the interrupt timeout period. // // WD1 WD0 Interrupt time-out Reset time-out 22.1184MHz second // // 0 0 2^17 2^17 + 512 131584 = 0.0059 // 0 1 2^20 2^20 + 512 1049088 = 0.0474 // 1 0 2^23 2^23 + 512 8389120 = 0.3793 // 1 1 2^26 2^26 + 512 = 3.0341 // // T2M: Timer 2 clock select: When T2M is set to 1, timer 2 uses a divide by // 4 clock, and when set to 0 it uses a divide by 12 clock. // T1M: Timer 1 clock select: When T1M is set to 1, timer 1 uses a divide by // 4 clock, and when set to 0 it uses a divide by 12 clock. // T0M: Timer 0 clock select: When T0M is set to 1, timer 0 uses a divide by // 4 clock, and when set to 0 it uses a divide by 12 clock. // MD2-0: Stretch MOVX select bits: These three bits are used to select the // stretch value for the MOVX instruction. Using a variable MOVX length // enables the user to access slower external memory devices or // peripherals without the need for external circuits. The RD or WR // strobe will be stretched by the selected interval. When accessing // the on-chip SRAM, the MOVX in