凸轮设计外文翻译参考文献.doc

外文文献翻译 () 英文原文 Failure Analysis, Dimensional Determination And Analysis , Applications Of Cams INTRODUCTION It is absolutely essential that a design engineer know how and why parts fail so that reliable machines that require minimum maintenance can be designed. Sometimes a failure can be serious, such as when a tire blows out on an automobile traveling at high speed. On the other hand, a failure may be no more than a nuisance. An example is the loosening of the radiator hose in an automobile cooling system. The consequence of this latter failure is usually the loss of some radiator coolant, a condition that is readily detected and corrected. The type of load a part absorbs is just as significant as the magnitude . Generally speaking , dynamic loads with direction reversals cause greater difficulty than static loads, and therefore, fatigue strength must be considered. Another concern is whether the material is ductile or brittle. For example, brittle materials are considered to be unacceptable where fatigue is involved. Many people mistakingly interpret the word failure to mean the actual breakage of a part . However , a design engineer must consider a broader understanding of what appreciable deformation occurs. A ductile material, however will deform a large amount prior to rupture. Excessive deformation, without fracture, may cause a machine to fail because the deformed part interferes with a moving second part . Therefore , a part fails(even if it has not physically broken)whenever it no longer fulfills its required function . Sometimes failure may be due to abnormal friction or vibration between two mating parts. Failure also may be due to a phenomenon called creep, which is the plastic flow of a material under load at elevated temperatures. In addition, the actual shape of a part may be responsible for failure . For example , stress concentrations due to sudden changes in contour must be taken into account . Evaluation of stress considerations is especially i