清洁起落架镜面37.pptVIP

深航维修工程部教案 课程简单介绍 培训内容：737系列飞机起落架镜面清洁 参考资料：737－300/700/800/900 AMM维护手册 32-00-10 LANDING GEAR INNER CYLINDER CHROME CLEANING/PAINTING 培训对象：维修工程部新进维修人员和外站人员 教学设施：电脑、投影仪 教学方式：课堂教学 THIS PAGE INTENTIONALLY LEFT BLANK 737系列飞机起落架镜面清洁 WARNING: MAKE SURE THE DOWNLOCK PINS ARE INSTALLED ON ALL THE LANDING GEAR. WITHOUT THE DOWNLOCK PINS, THE LANDING GEAR COULD RETRACT AND CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT. CAUTION: DO NOT RUB(摩擦) THE SMEAR MARKS TO TRY TO REMOVE THEM. THIS COULD CAUSE DAMAGE TO THE CHROME SURFACE. (1) On the shock strut inner cylinder chrome, you may find dark smear marks that have a small amount of texture（质地，机理， 结构） and are difficult to remove. These smear marks are created by oxidation（氧化） of the self lubricating material that is deposited（堆积） on the chrome by the shock strut bearings. These smear marks are considered acceptable. (2) Clean the dirt, oil and other unwanted materials from the chrome surface of the inner cylinders with a clean cloth that is soaked in one of the these: THIS PAGE INTENTIONALLY LEFT BLANK 1、清洁镜面的作用： 便于观察减震支柱是否有渗漏；延长使用寿命 2、红油的牌号： BMS3-32 MIL-H-5606 深航维修工程部培训教案 课程名称：起落架镜面清洁 课程编号：NB2005/08 培训课时：0.5课时 TRAINING PURPOSE ONLY Purpose1. This procedure provides instruction to clean the dirt and grit from the chrome（铬合金）surfaces of the landing gear inner cylinders（筒）. Cleaning these chrome surfaces will make it easier to determine if any seals leak and it will also prolong（延长）the life of the seals. 1. General Reference Description Specification D00467 Fluid Landing Gear Shock Strut BMS3-32, Type II MIL-H-5606 2. Consumable Materials 3. CLEANING (a) fluid, D00467 BMS3-32 MIL-H-5606 NOTE: To clean the maximum exposed chrome surface of the inner cylinder, d