锂-硫电池碳-硫复合材料制备及其电化学性能研究.pdfVIP

  • 5
  • 0
  • 约8.85万字
  • 约 71页
  • 2018-05-01 发布于江苏
  • 举报

锂-硫电池碳-硫复合材料制备及其电化学性能研究.pdf

锂-硫电池碳-硫复合材料制备及其电化学性能研究

摘要 化的乙炔黑为碳核,通过乙炔黑与浓硫酸和乙酸酐的反应在其表面进行 磺酸化接枝磺酸基,然后再接枝高分子PEG,最后通过液相沉积法沉积 单质硫,成功合成高硫含量(82.5%)的碳核接枝核壳结构碳一硫复合材 mg 166mAh cm之的情况下,P-S03一AB@S的首次放电比容量高达1g~,循 mAh 环100充放电次后,极片放电比容量为820g~,容量保持率高达 70%,库伦效率也接近100%。 4.片层状的碳一硫复合材料制备及电化学性能研究。以蔗糖为碳源, 经过浓硫酸的碳化、沉硫及水合肼还原等步骤,合成具有片层结构的碳 .硫复合材料,并对其电化学性能进行了测试和研究。 关键词:锂一硫电池,液相沉积法,硫正极,碳一硫复合材料 II CoMPoSITE RESEARCHONTHECARBoN.SULFUR BATTERY MATERIALSFoRLITHIUM.SULFUR ABSTRACT Thedemandfor costand life,low energydensity,longcycle high tosearchfornew environmentbatteries scholars friendly inspiresmany with systemsprominentperformance.The seemstobea fit itsabundantandlow—costactive considering materials, good environmental theoretical and benignity,highgravimetriccapacityenergy ofthese itsfull is density.Inspite outstandingadvantages,realizingcapacity difficultduetothelow 0。0Scm。1at sulfur,the conductivity(5×125。C)of intermediate thatform the polysulfidesduringdischarge/chargeprocesses inthe ofthedifferent are soluble addition,because easily electrolyte.In densitiesbetweensulfurandits

文档评论(0)

1亿VIP精品文档

相关文档