切换流程与统计.doc

切换流程和统计 统计和counter的对应关系 anch_og_att anch_og_suc nonanch_og_att nonanch_og_suc anch_in_att anch_in_suc nonanch_in_att nonanch_in_suc Nnbrhbantot Nnbrhbansucc Nnbrhsnatot Nnbrhsnasucc Nnbrhsantot Nnbrhsansucc Nnbrhinatot Nnbrhinasucc Counter的解析 COUNTER 解析 NNBRHBANTOT Number of basic handover attempts to neighbouring MSC (基本切出申请) NNBRHBANSUCC Number of successful basic handovers per MSC to neighbouring MSC NNBRHSANTOT Number of subsequent handover attempts from neighbouring MSC back to anchor MSC (切回到原MSC的后续切入申请) NNBRHSANSUCC Number of successful subsequent handovers from neighbouring MSC back to anchor MSC per serving MSC NNBRHINATOT Number of incoming handover attempts from neighbouring MSC (incoming handovers include basic handovers and subsequent handovers from neigh- bouring MSC) (切入申请, 包括基本切入和后续切入) NNBRHINASUCC Number of successful incoming hando- vers from neighbouring MSC (incoming handovers include basic handovers and subsequent handovers from neigh- bouring MSC) NNBRHSNATOT Number of subsequent handover attempts to neighbouring MSC (back to anchor or to third MSC) (后续切出申请, 包括切回原MSC或第三方MSC) NNBRHSNASUCC Number of successful subsequent handovers to neighbouring MSC (back to anchor or to third MSC per target MSC) 基本切换流程：从MSC-A切到MSC-B MSC-A收A-HO-REQUIRED后，发MAP-PREP-HANDOVER REQ.前，MSC-A的Nnbrhbantot（MO为MSC-B）加1； MSC-B收MAP-PREP-HANDOVER REQ.后，发MAP-ALLOCATE-HANDOVER-NUMBER REQ.前，MSC-B的Nnbrhinatot（MO为MSC-A）加1； MSC-B收A-HO-COMPLETE后，发MAP-SEND-END-SIGNAL REQ.前，MSC-B的Nnbrhinasucc（MO为MSC-A）加1； MSC-A收MAP-SEND-END-SIGNAL REQ.后，发A-CLR-CMD/COM前，MSC-A的Nnbrhbansucc（MO为MSC-B）加1。 需要注意的是Nnbrhbantot和Nnbrhinatot都是MSC检查过SERVING CGI、TARGET CGI以及ANCHOR MSC后才加1的。 切回到原MSC流程 MSC-B收到A-HO-REQUIRED后，发MAP-PREP-SUB-HANDOVER REQ.前，MSC-B的Nnbrhsnatot（MO为MSC-A）加1； MSC-A收到MAP-PREP-SUB-HANDOVER REQ.后，发A-HO-REQUEST前，MSC-A的Nnbrhsantot（MO为MSC-B）加1； MSC-A收到A-HO-COMPLETE后，发MAP-SEND-END-SIGNAL RESP.前，MSC-A的Nnbrhsansucc（MO为MSC-B）加1； MSC-B收到MAP-SEND-END-SIGNAL RESP.后，发A-CLR-CMD/COM前，MSC-B的Nnbrh