Ts流结构,PSISI表格,2905.pptVIP

Ts流基本结构，Psi/Si表格，290测量 主要参考文献 ISO/IEC 13818-1 TR 101 211 EN 300 468 TR 101 290 Transport Stream Structure The Transport Stream combines one or more programs with one or more independent time bases into a single stream. The Transport Stream is designed for use in environments where errors are likely, such as storage or transmission in lossy or noisy media. Transport Stream packets are 188 bytes in length. Transport Stream Structure sync_byte -- The sync_byte is a fixed 8 bit field whose value is 0100 0111 (0x47). Sync_byte emulation in the choice of values for other regularly occuring fields, such as PID, should be avoided. transport_error_indicator -- The transport_error_indicator is a 1 bit flag. When set to 1 it indicates that at least 1 uncorrectable bit error exists in the associated Transport Stream packet. This bit may be set to 1 by entities external to the transport layer. When set to 1 this bit shall not be reset to 0 unless the bit value(s) in error have been corrected. PID -- The PID is a 13 bit field, indicating the type of the data stored in the packet payload. PID value 0x0000 is reserved for the Program Association Table . PID value 0x0001 is reserved for the Conditional Access Table . PID values 0x0002-0x000F are reserved. PID value 0x1FFF is reserved for null packets. transport_scrambling_control -- This 2 bit field indicates the scrambling mode of the Transport Stream packet payload. The Transport Stream packet header, and the adaptation field when present, shall not be scrambled. In the case of a null packet the value of the transport_scrambling_control field shall be set to 00. continuity_counter -- The continuity_counter is a 4 bit field incrementing with each Transport Stream packet with the same PID. The continuity_counter wraps around to 0 after its maximum value. The continuity_counter shall not be incremented when the adaptation_field_control of the packet equals 00 or 10. data_byte -- Data bytes shall be contiguous bytes of data from