循环对称结构的模态分析简介（Modal analysis of cyclic symmetrical structures）.docVIP

循环对称结构的模态分析简介（Modal analysis of cyclic symmetrical structures） Symmetry load symmetry of axisymmetric structure Modal analysis of cyclic symmetric structures is mainly used in modal analysis of circular symmetric structures such as gears, turbines, impellers, etc.. It extends the whole model by analyzing a sector of the structure by analyzing the sector. There are 6 steps in it. 1, establish the basic sector model, that is, the model that only builds 1/n, a tooth and a blade. 2, determine the cyclic symmetry plane (which can be determined automatically or manually). 3, impose boundary conditions. 4, formulate analysis types and analysis options. 5, specify the loop solution option through the cycop command, and use solve to solve. 6, the vibration mode is extended to all 360 degree range by /cyexpand, and the whole result is observed. Due to the choice of harmonic index, the natural frequency will be messy in the arrangement. The previous version of ANSYS called the harmonic index called nodal diameter, and now is called harmonic index. According to the overall structure analysis, the system will be in accordance with the frequency from small to large. With the harmonic index calculated in frequency, he arranged time is arranged in accordance with the increase of harmonic index, therefore, the natural frequency corresponding to the big and small, irregular (but the same arrangement is numerical, different). The solution is, you can extract the result, and you can arrange it from small to large. In addition, there are some points for attention in solving this process. A in the establishment of the basic sector, in the cylindrical coordinate system, you set the csys 1 can be, B additionally, sector angle selection can be divisible by 360. C selects the nodes when choosing the cyclic symmetry surface, as if other features are not available. AC is more important, B just a little attention. And then theres the solution The calculation of vibration modes by axisymmetric e