毕业设计论文-基于PROTUES设计万年历.docVIP

摘 要 本文分析了传统的单片机教学中存在的诸多问题,提出了用Proteus软件来进行单片机仿真教学的观点。介绍了用Proteus软件进行单片机仿真教学的制作和演示过程,总结了用Proteus软件进行单片机仿真教学的优点和不足。 随着现代计算机技术的迅速发展,使用EDA(电子设计自动化)软件进行的电路设计与仿真已经成为现代电子技术系统设计的必然趋势。文中应用Proteus软件实现了单片机LED(发光二极管)流水灯电路的设计与仿真,介绍了Proteus的单片机软硬件实时动态仿真功能及仿真过程,并给出Keil与Proteus联合仿真的方法。此方法能加深学生对单片机原理的理解,也锻炼了学生进行软硬件综合开发的能力。实践证明,Proteus仿真软件能够提高开发效率,降低开发成本,缩短开发周期。 关键词：动态仿真、联合仿真、优点 Abstract This paper analyzed the microcontroller existing problems in teaching, this paper presents a simulation software for SCM Proteus view of teaching. Proteus software are introduced with the production and single-chip emulation teaching demonstration, Proteus with MCU software simulation teaching advantages and disadvantages. Along with the rapid development of modern computer technology, using EDA (electronic design automation) software of circuit design and simulation has become the modern electronic technology system design is an inevitable trend. The application of SCM Proteus software realize the emitting diode (LED) water light circuit design and simulation, introduces the hardware and software of the MCU Proteus real-time dynamic simulation function and the process of simulation, and Proteus Keil and joint simulation method. This method can deepen students to understand, and the principle of microcontroller hardware exercise students comprehensive development ability. Practice has proved, Proteus simulation software to improve efficiency and reduce the development development costs, shorten the development cycle. Key words：Dynamic simulation, joint simulation,advantages 目 录 引言 ……………………………………………………………………………1 1 系统电路任务……………………………………………………………….3 1.1 系统电路要求………………………………………………………………3 1.1.1 基本要求…………………………………………………………………3 1.1.2 发挥部分…………………………………………………………………3 1.2 系统电路分析……………………………………………………………….4 2 系统方案设计……………………………………………………………….5 2.1 控制电路核心模块方案设计…………………………………………………5 2.1.1 单片机芯片的选择方案和论证…………………………………………….5 2.1.2 时钟芯片的选择方案和论证……………………………………………….5 2.2 显示电路方案设计………………………………………………………….6 2.2.1 显示模块选择方案和