显示器进工厂维修模式的方法（Method of maintenance mode of monitor in factory）.docVIP

显示器进工厂维修模式的方法（Method of maintenance mode of monitor in factory） Now most of the display menu for adjustment of parameters. The users mode of operation when adjusting the above parameters is called user mode. At the factory, the microprocessor has stored the user mode the best adjustment parameters and some special parameters hidden. Special parameters can only be transferred in a special way. We call this factory model the only way we can transfer parameters in a special way. And sometimes the user will accidentally transfer the factory model, and by mistake, or out of curiosity to do the adjustment. So after the exit and do not know how to go, so that color display state changes, and cannot be restored by user mode. This does not rule out changes in memory parameters. For instructions on how to enter the factory model and adjust it, there is no instruction. To this end, several common Caixian into the factory method pattern is introduced as follows. EMC D777: turn off the monitor power, remove the power line, press the menu select key, and dont let go. Plug in the power line and switch on the power switch. Then the screen appears in the factory mode. EMC 797: turn off the display power, remove the power line, press the control panel at the top of the adjustment button, do not let go. Plug in the power line, switch on the power switch, and then enter the factory mode. EMC17 inch flat screen: after the shutdown, and press the U and exit button. Press the power switch to boot, then the upper right corner of the screen appears factory mode adjustment options. PHILPS 105S5: while pressing the left - hand button and the right OK button, press the power switch to switch on, then the screen appears factory mode adjustment options. PHILPS 109B2: after booting, press both the left t button and the U button on the right. After 15 seconds, you can enter the factory mode. PHILPS 107G: press the t and U keys at the same time, then press the OK button to enter the factory mode. T