chapter05 DC to DC Converters 《电力电子技术 知识（第5版）》英文版本课件.pptVIP

Power Electronics;Outline;5.1 Basic DC to DC converters;5.1 Basic DC to DC converters;Dc component of switch output voltage;Thought process in analyzing basic DC/DC converters;Actual output voltage waveform of buck converter;The small ripple approximation;Buck converter analysis:inductor current waveform;Inductor voltage and currentsubinterval 1: switch in position 1;Inductor voltage and currentsubinterval 2: switch in position 2;Inductor voltage and current waveforms;Determination of inductor current ripple magnitude;Inductor current waveform during start-up transient;The principle of inductor volt-second balance: Derivation;Inductor volt-second balance:Buck converter example ;The principle of capacitor charge balance: Derivation;Boost converter example;Boost converter analysis;Subinterval 1: switch in position 1;Subinterval 2: switch in position 2;Inductor voltage and capacitor current waveforms;Inductor volt-second balance;Conversion ratio M(D) ofthe boost converter;Determination of inductor current dc component;Continuous-Conduction-Mode (CCM) and Discontinuous-Conduction-Mode (DCM) of buck;Continuous-Conduction-Mode (CCM) and Discontinuous-Conduction-Mode (DCM) of boost;5.2 Composite DC/DC converters and connection of multiple DC/DC converters;5.2.1 A current reversible chopper;Bridge chopper (H-bridge chopper);Multi-phase multi-channel DC/DC converter;5.3 Isolated DC to DC converters (Indirect DC to DC converters );Classification of isolated DC to DC converters;5.3.1 Forward converter;5.3.2 Flyback converter;5.3.3 Half bridge converter;5.3.4 Push-pull converter;5.3.5 Full-bridge converter;5.3.6 Rectifier circuits in the isolated DC to DC converters;5.3.7 Configuration of switching power supply