机械毕业设计（论文）-分油套注塑模具设计.docx

摘要从塑料材料的性能分析，根据塑件的基本形状和尺寸入手，合理选择注射的成型方法。通过对塑件工艺性的分析和对模具生产条件及制造水平的掌握。开始进行模具的结构设计。其中模具的结构设计过程包括：型腔的数目和位置的确定，模具的总体结构形式设计，动模及定模成形零件尺寸的确定，浇注系统形式及尺寸的确定，脱模方式的确定，调温及排气系统的确定,模具结构各部分完成以后，便开始绘制模具的结构草图，根据具体尺寸校核注射模具及注射机的有关尺寸，并对工艺参数进行核定和计算。之后进行初步的审查对所存在的问题进行确定和修正，然后绘制模具总装配图，按装配图绘制成型零件及所有需要加工的零件工作图，同时考虑零件的加工工艺。关键字：成型工艺；结构设计；试模全套图纸，加AbstractFrom the plastic material performance analysis, according to models a basic shape and the size obtain, reasonably selects the injection to take shape the method. Though to models a technological analysis and to the mold working condition and manufacture level grasping, formulates the formed craft card. In formulates after the formed craft card, starts to carry on the mold the structural design. Mold structural design process includes. The cavity number and the position determination, the mold overall structural style design, moves the mold and decides the mold forming components size the determination ,pours the system andthe size determination, the drawing of PA66tterns mode determination after, adjusts warm and the exchaust gas completes, then starts to draw up the mold the structure schematic diagram, according to the specific size examination injection mold and the injection computer relatedsize, and carries on the checking and the computation to the craft PA66rameter. Carries on the determination and the revision afterward, then the plan mold assembly drawing, takes shape the components and all needs to process, simultaneously considers the components the processing craft.Keyword: takes shape the craft； the structural design.目录摘要2Abstract3目录V前言1第二章 塑件的分析32.1 塑件结构分析32.1.1 塑件及塑件材料的特点32.1.2 影响塑件尺寸精度的因素42.2 塑件材料的选择与工艺性分析52.2.1 工艺性分析52.2.2 材料的选择52.2.4 PA66的注射成型工艺参数62.3 塑料成型工艺的种类72.3.1 注射成型72.3.2 压缩成型72.3.3 压住成型72.3.4 挤出成型8第三章 注塑机的选择与校核93.1 注塑机的选择93.1.1 由公称注射量选定注射机93.1.2 由锁模力选定注射机93.2 注塑机的校核103.2.1 型腔数目的确定及校核103.2.2 锁模力的校核103.2.3 开模行程的校核11第四章 浇注系统124.1 分型面的确定124.1.1 分型面的选择原则124.1.2 分型面的决定134.2 浇注系统的定义134.3 主流道的设计144.4 分流道的设计154.5 拉料杆与冷料穴的设计164.6