skja_13 Plastic Deformation of Crystal 材料科学基础（英文教材）.ppt

材料科学基础Fundamental of Materials;3. Application of Schmid’s law;Solution: Draw a orientation cell. Label the loading direction in the cell. Determine the active S.S. by reflection rule.;Determine the active slip systems by Schmidts law Draw a standard projection;Label the loading direction in standard projection. ;Example: Given: BCC crystal having {110}111 slip system Determine active slip system in response to tensile loading along .; ④ locate inside the orientation triangle ( ), single slip. locate at the edge of the orientation triangle ( ), double (duplex) slip. locate at the corner of the orientation triangle, multiple slip.;A tensile force is applied on a BCC cylindrical bar with across section of 25mm2. The initial axis is . The CRSS is 0.4MPa . The slip plane is . ;Solution:;duplex S.S. : ;at the beginning of duplex slip;§4.3 Change in Reference Direction Reference Places during Slip;From the figure ;Examples: [given] [ ask ] [solve];Discussion: for compression if located on S.P. then and ;Ⅱ.Change of reference planes take two vectors in the reference plane. let after slip;, for tension , for compression;Examples and Discussions;Exercise;Thank you !