FlexRay通信系统协议规范V2.1修订本A-勘误表V1.pdfVIP

FlexRay Communications System Protocol Specification v2.1 Revision A Errata Sheet Version 1 FlexRay Protocol Specification v2.1 Revision A Disclaimer Disclaimer This document as released by the FlexRay Consortium is intended for the purpose of information only. The use of material contained in this document requires membership within the FlexRay Consortium or an agreement with the FlexRay Consortium. The FlexRay Consortium will not be liable for any unauthorized use of this Specification. Following the completion of the development of the FlexRay Communications System Specifications commercial exploitation licenses will be made available to End Users by way of an End Users License Agreement. Such licenses shall be contingent upon End Users granting reciprocal licenses to all Core Partners and non-assertions in favor of all Premium Associate Members, Associate Members and Devel- opment Members. All details and mechanisms concerning the bus guardian concept are defined in the FlexRay Bus Guardian Specifications. The FlexRay Communications System is currently specified for a baud rate of 10 Mbit/s. It may be extended to additional baud rates. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. The word FlexRay and the FlexRay logo are registered trademarks. Copyright © 2004-2006 FlexRay Consortium. All rights reserved. The Core Partners of the FlexRay Consortium are BMW AG, DaimlerChrysler AG, Freescale Halbleiter Deutschland GmbH, General Motors Corporation, Philips GmbH, Robert Bosch GmbH, and Volkswagen AG. Version 1