考虑渗流作用下的坝基深层抗滑稳定性分析-analysis of deep anti-sliding stability of dam foundation considering seepage.docxVIP

AbstractAs the main type of the dam in hydro-junction, the deep foundation stability against sliding safety engineering has been the most critical problem. With the development of Chinas hydropower, the scale of high concrete gravity dam is increasing currently. Geological foundation conditions and stability are becoming more complex. The fault with foundation, weak interlayer and etc has brought great difficulties in the finite element model. Studying the constitutive behavior of soft interlayer and considering the coupling of Seepage field and stress field to the effect of stress and deformation of the overall dam has the important theoretical and practical value.Describing the specific application of the contact element in engineering, introduing that the stress - strain nonlinearity of thin-layer contact element proposed by Desai, deriving the flexibility matrix in overall coordinate system, writing the constitutive procedure with Drucker-Prager yield criterion and the Drucker-Prager type function for the potential function, verified the accuracy of this procedure with an example finally.The concept of uplift pressure and different ways of uplift pressure imposed is described. The specific ideas and deficiencies of various forms is described. Considering the coupling of seepage field and stress field and using an example to verifiy the different modes. The result shows that the calculated values (stress, displacement) with considering the coupling of Seepage field and stress field are less than the result of traditional method. Also it is closer to the actual situation.To get the different effects with different failure criterions, we can find that the safety factor against sliding were similar. The safety factor of with no- Calculation is larger. So we recommend the plastic zone as the main safety criterion and consider the other way.Considering the effect of seepage field an the elastic-plastic constitutive model for self , the FEM software ABAQUS is utlized t