毕业设计（论文）基于单片机GPRS通信系统的设计.docVIP

毕业设计（论文）--基于单片机GPRS通信系统的设计 Abstract GPRS general packet radio service is to use the concept of packet switching the development of a wireless transmission, a GPRS network is based on existing GSM global system for mobile communications network realization, in the existing GSM network of some nodes need to increase, such as GGSN GPRS gateway support node and SGSN GPRS service support node .The main Function is to record SGSN mobile terminal current position information, and in the mobile terminal and GGSN completed of mobile group data to send and receive. GGSN main up gateway function, and can be with a variety of different data network, such as ISDM integrated services digital network , PSPDN packet switching public data networks and LAN local area network , etc. GGSN can put the GSM network packets of GPRS group for protocol conversion. So the group sent packets to a remote TCP/IP or X.25 network. GPRS nets not only has to cover range, data transmission speed, high quality, and always online communication according to flow billing, and a bit, and its itself is a group sex data networks, support the TCP/IP protocol, can be directly and Internet communication. Therefore, GPRS is in wireless Internet and environmental monitoring portable type, traffic monitoring, mobile office, and other industries with an unmatched price advantage. Keywords：Data transmission and reception Single-chip, microcomputer, GPRS communication system 目录 摘要 I Abstract II 目录 III 前言 1 1 GPRS通信 2 1.1 国内外的研究现状 2 1.2 课题研究的背景和意义 3 2 GPRS通信无线网络的介绍 5 2.1 什么是GPRS无线通讯网络 5 为什么要有GPRS 5 2.2 GPRS的网络结构 5 GPRS协议栈 6 基于GPRS的TCP/IP协议 7 GPRS究竟是什么 8 GPRS有什么优点 8 2.3 中国移动发展GPRS的市场定位是什么 9 G先锋―GPRS 9 3 GPRS通信系统的整体设计方案 11 3.1 GPRS通信系统的方案论证 11 3.2 GPRS通信系统的硬件设计方案 13 系统总体功能概述 14 单片机的用途和使用 14 单片机STC89C51简介 15 GPRS模块简介及应用 16 CTM900-C GPRS模块简介 17 3.3 GPRS通信系统的软件设计方案 17 连接的建立 17 数据处理 24 主程序流程 25 设计实物图 26 结论 27 致谢 28 参考文献 29 附录1 电路原理图 30 附录2 系统程序 31 前言 近年来，通信技术和网络技术的迅速发展，特别是无线通信技术的发展，使得