DXD-50P片剂物料自动包装_机送料和成型系统设计--2012毕业设计.docVIP

DXD-50P片剂物料自动包装_机送料和成型系统设计--2012毕业设计 摘 要 DXD-50P使用单片机进行控制，用光电检测技术和步进电机拉袋技术替代传统的机械式供袋技术，使得包装精度更高、可靠性更好，包装的产品计量准确，封口无夹料现象。合理的设计，应用得当的综合技术．还创造性的采用了柔性落料，缓冲充填的方法，使该机有效的提高了包装的质量。该包装机适用于各种片剂物料和部分粉末物料的包装，具有良好的社会效益和经济效益。 首先设计落料和成型系统。这包括传送包装材料机构、落料充填物料装置、成型装置、热封装置、裁切装置和成品传送带以及机架。特别是落料充填物料装置根据薄层摩擦学原理，创造性的采用了柔性落料、缓冲充填方法，有效地解决物料破损与包装速度问题。 其次，用一根垂直的主轴做主传动，用一对锥齿的垂直传动来实现传输带的平动；用一对凸轮在径向的跳动来实现热封器和剪切器的张开与闭合。设计出这些能实现总功能的机构，再对每个机构进行强度和寿命校核。算出每个部分的功率，查表选择所需的电动机型号。确定每个机构的尺寸，强度和平衡性也都被考虑。接着画出各个零件图，进而完成整台机器装配图的绘制。 关键词： 包装机，片剂，热封 I ABSTRACT DXD - using SCM control 50P photoelectric detection technology, with stepper motors and replacement of traditional technology and bag bag, mechanical technology for higher precision and reliability of packaging, packaging products accurate measurement, sealing clamp material without phenomenon. The reasonable design, application of integrated technology. Proper using of creative and flexible blanking method of buffer, filling machine and improve the quality of the packing. This machine is suitable for packaging materials and parts of tablet powder materials packaging, has the good social benefits and economic benefits First, design the section of sending packing materials and filled with some materials. This includes sending packing materials, packing materials blanking devices, molding equipment, equipment and the finished crop and rack. Particularly in the light of TLC terminological principle, creative use of the flexible blanking the buffer filling and effectively solute the packaging material damage and speed problem. Secondly, design a vertical spindle master drive, with a pair of grey vertical transmission belt drive to achieve the translation; use a radial cam in the beating to achieve the Heat-seal and clipper’s opening and closing . Designed to achieve the functions of these institutions, and the strength of each agency and to check life. Calculat