PP波与PS波叠后联合反演研究与应用-e.docVIP

Research and Application of 3D Post-stack PP and PS Waves Joint Inversion Tianji Xu (Deyang Branch Institute under Exploration and Production Institute of Southwest Petroleum Branch Company, SINOPEC) Bing-jie Cheng (Mobile Postdoctoral Center，Southwest Branch Co., SINOPECQi-gang Gan (Deyang Branch Institute under Exploration and Production Institute of Southwest Petroleum Branch Company, SINOPEC) Summary more abundant lithology properties can be obtaining by 3D post-stack PP and PS waves joint inversion which has been one of hotspots of the multi-component seismic exploration. But limited by great difference of PP and PS waves and great difficulty of matching, many post-stack P and C waves joint inversion technologies do not apply PS wave information combined with PP waves, and always obviate the affinity of reflection coefficients, propagation velocity of seismic waves and density, impedance of geologic body, thus reducing the precision of inversion parameters. In fact, based on synthetic information of geology and full-wave logging, we can apply the function of PP and PS waves velocity and density, realizing 3D post-stack PP and PS waves joint inversion and obtaining high precision density and impedance. And by using 3D pre-stack PP and PS waves joint inversion to the multi-component seismic data, we can get parameters which are propitious to reservoir prediction and liquid detection, and propose more credible evidences for ultra-tight heterogeneous fractured-porous reservoirs exploration. A case study of post-stack joint inversion technique to seismic data from the Sichuan Basin in the southwest of China provides robust indications for reservoir prediction, lithology distinguish and gas detection. Introduction With the advent of multicomponent seismictechnology, the study of PP and PS waves joint inversion has become increasingly common in the industry. Compared with traditional technology of post-stack P wave inversion, 3D post-stack PP and PS waves joint inver