土木工程毕业设计计算书-徽省合肥市某大学办公楼设计.docVIP

毕业设计说明书 作 者： 曹 巍 学 号： 系 部： 建筑工程学院 专 业： 土木工程 题 目： 安徽省合肥市某大学办公楼设计 指导者： 谢淮宁/赵冰华 副教授/讲师 评阅者： 章丛俊 研究员级高级工程师 2013年6月 南京毕业设计说明书中文摘要 本工程是安徽省合肥市某大学办公楼，共4层，第一层层高3.3米、其余层层高3.0米，总高12.3米，为钢筋混凝土框架结构。本框架抗震等级为三级，抗震设防烈度为7度。本说明书包括如下部分： 工程概况； 荷载计算； 框架结构的受力分析、计算和设计； 屋盖、楼盖设计； 基础设计。 本设计包括建筑设计和结构设计，完成10张建筑施工图和8张结构施工图。结构设计主要对⑩轴抗震设计，底部剪力法水平地震荷载作用大小水平荷载作用下结构内力计算竖向荷载作用下的结构内力找出最不利内力配筋计算并绘图。此外还进行了 关键词： 框架结构 ， 结构设计 ， 抗震设计 毕业设计说明书外文摘要 Title the design of college office building ，hefei City, Anhui Province. Abstract:The project is in hefei City, Anhui Province, a college office building. It has four stories, the height of the first story is 3.3 meters ,the others is 3.0 meters and the whole building is 12.3 meters.Anti-seismic grade of the structure is 3,and its seismic fortification intensity is 7. The design includes the following components: 1. project overview； 2. load calculation； 3.Analysis of the frame structure，including calculation and design； 4. roof，floor design； 5. the foundation design. The architectural and structural designs of the building are performed.8 structural and 10 architectural shop drawings are finished.The major purpose of the design is to do the anti-seismic design in the longitudinal frames of axis ⑩.According to the structural scheme, the horizontal seismic force can be got by way of the bottom-shear force method. The internal forces under the horizontal loads are analysied in terms of D value method and the internal forces under the vertical loads are calculated by means of second moment distribution method. One set of the most adverse internal forces of the frame structure are found out after internal forces combination, which will be the basis of protracting the reinforcing drawings of the components.Moreover,the lateral deformation of the structure, the floor designs of the standard layer and the roof layer、the stairs and the foundation are