城市生活污水cass工艺设计毕业论文.doc

城市生活污水CASS工艺设计 有机物的去除率预计为90～95%，氮的去除率可以达到70～80%，磷的去除率可达90%。CASS工艺技术成熟，流程简单、管理方便、运行方式灵活、处理效率高、具有良好的脱氮效果、出水水质好，该工艺已经成功运用于工程实践，具有十分良好的经济效益、环境效益和社会效益。CASS工艺 脱氮除磷 去除率 CASS Process Design Of Municipal Sewage ABSTRACT With the rapid development of industrial and agricultural production and improve living standards, water stress and sewage disposal problems have become increasingly prominent. At present, most cities and towns direct discharge of sewage by the way, did not take proper control measures, adding to the pollution of the environment. in the country under the new policy of sustainable development, environmental protection has been the people of all levels of government and the national attention, environmental pollution is more serious. So it is both inevitable and necessary to develop the urban sewage treatment. Now, a Sewage treatment plant will be planed to build in XXX city. Treatment scale of Sewage is 60000m3/d. The effluent quality carries out primary standards from integrated wastewater discharge standard—GB8978—1996. This design uses cyclic activated sludge system(CASS). The estimated removal efficiency of organic materials is between 90 percent and 95 percent, the removal efficiency of nitrogen ranges from 70 to 80 percent., and removal efficiency of phosphorus can reach 90%.The CASS process is a ripe technology with a lot of advantages,such as being easy to manage,flexible operational ways,good disposed effect,and good nitrogen removal effect.It is suitable for small and mid-scale municipal wastewater treatment plants because of its low investment and operational cost .The processing has been successfully applied for actual engineering practice,and has good economic,environmental and social efficiency. This design contains the identification, each monomer process of calculation, construction drawings drawing etc. Keywords: sewage treatment plant, CASS technique, Nitrogen and phosphorus removal；removal efficiency. 目 录