基于Matlab Simulink风力发电爬山法 建模研究.pdfVIP

Dynamical Systems and Control 动力系统与控制, 2017, 6(4), 151-157 Published Online October 2017 in Hans. /journal/dsc /10.12677/dsc.2017.64019 Study Modeling of Wind Power Climbing Method Based on Matlab/Simulink 1 2 Mingxing Gu , Xiaolian Zhang 1 Changshu Power Supply Company, State Grid Jiangsu Electric Power Company, Suzhou Jiangsu 2 School of Electric Power Engineering, Nanjing Institute of Technology, Nanjing Jiangsu nd th th Received: Aug. 2 , 2017; accepted: Aug. 26 , 2017; published: Aug. 30 , 2017 Abstract In view of the wind power generation hill-climbing method, the S function modeling is more com- plex, error prone and difficult to troubleshoot. In the paper, it is established by using Mat- lab/Simulink basic module. Simulation results show that the hill-climbing model based on Mat- lab/Simulink can find the maximum power point tracking correctly and realize the MPPT control strategy. The modeling method based on Matlab/Simulink is simple and effective, and indepen- dent of the wind power system simulation model. For beginner, it is easy to improve the algorithm, and it’s very practical. Keywords Wind Energy Conversion System, Hill-Climbing Searching, Matlab/Simulink, Maximum Power Point Tracking 基于Matlab/Simulink的风力发电爬山法 建模研究 1 2 顾明星 ，张小莲 1 国网江苏省电力公司常熟市供电公司，江苏 苏州 2南京工程学院电力工程学院，江苏 南京 收稿日期：2017年8月2 日；录用日期：2017年8月26 日；发布日期：2017年8月30 日 文章引用: 顾明星, 张小莲. 基于 Matlab/Simulink 的风力发电爬山法建模研究[J]. 动力系统与控制, 2017, 6(4): 151-157. DOI: 10.12677/dsc.2017.64019 顾明星，张小莲 摘 要 针对风力发电爬山法S函数建模原理较为复杂，易出错且不易排查的缺点，采用Matlab/