解读对调压器的般介绍及其选型方法中英文.docVIP

解读对调压器的一般介绍及其选型方法 General introduction of voltage regulator and its selection method 一、一般介绍 General introduction 调压器的主要特性参数 The main characteristic parameters of regulator 适用对象： Applicable objects: 介质： Medium: 设计温度： Design temperature: 环境温度： Ambient temperature: 规格（公称尺寸）： Specification ( nominal): 阀口尺寸： The valve size: 全开能力、流量系数： Full capacity, flow coefficient: 承压能力（公称压力）： Bearing capacity (nominal pressure ): 出口压力范围、设定值： Outlet pressure range, the setting value: 启动差压： Start pressure: 调压精度： The accuracy of the regulator: 关闭精度： Close the accuracy: m、超压切断范围、低压切断范围、设定值： M, super pressure cutting range, low cutting range, setting value: n、放散压力。 N, releasing pressure. 类型及其特性 The types and characteristics of 按作用原理分： 直接作用式（大皮膜）、间接作用式（指挥器，伺服式）； According to the principle of action: direct action ( in the film ), indirect effect ( command, servo type ); 调压对象：后压式、前压式； Pressure: pressure, pressure after the object before; 按流动方向分：曲流式、轴流式； According to the flow direction: meander type, axial flow type; 按阀口密封分：软密式（无泄漏）、硬密式（微泄漏）； According to valve sealing points: the soft sealing type ( no leakage ), hard sealing type ( leakage); 按阀口形式分：单阀口、双阀口；盘形、锥形、塞形、孔口形；阀式、膜式（平、套形）等（阀门特性不同）； According to the valve port forms : single valve, dual valve port; disc, conical, plug, hole shape; valve type, film type ( flat, shape ), ( the valve characteristics of different ); 按调压器功能分：普通式、两极、监控式、一体切断式、内置放散式、电控（动）式、组合式等。 According to the voltage regulator functions : ordinary type, bipolar, monitoring, one off, a built-in discharge type, control ( dynamic ) type, combination type etc.. 国内常用的进口调压器制造厂家及产品特点 The commonly used imported regulator manufacturer and product characteristics ELSTER（德、美、英）：轴流、径向流、中低压、地下； ELSTER ( Germany and the United States, Britain ): axial, radial flow, low pressure, underground; TARTARINI（意）：轴流、高中低、多功能、地下、站； TARTARINI ( Italy ): axial flow, high and low, multifunctional, underground, station; RMG（德、英）：轴流、高中低、多功能、地下、站、多指挥器、皮膜型式、阀口材料； RMG ( German, English ): axial flow, h