化工机械课程设计（英文）.docxVIP

DaLianUniversity of TechnologyThe Mechanical Design of a Distillation Column设计日期： 2011年12月1日 班 级： 姓 名：学 号: 指导老师： 喻建良 ContentAbstract3Introduction3Design Conditions4Calculation of Column Body and Head Thickness5Calculation of Column Mass Loads5Calculation of Wind Load and Wind Bending Moment7Calculation of Seismic Bending Moment9Axial Stress Caused by Loads10Strength and Stability Check of Dangerous Section of Column Body and Skirt11Stress Check in Hydrostatic Pressure Test and Installation13Design of Base Ring14Calculation of Anchor Bolt15Calculation of reinforcement for openings16Nomenclature18Reference19AbstractThis work is based on the certain process and environment conditions, such as pressure, wind load, seismic load as well as mass. As the distillation column will be stalled in Dalian, the environment conditions of Dalian are chosen and according to the working process, some of the details are changed to fit the actual production. Computer-aided design (CAD) is used as the basic system to the design. In this work, I calculated all the parameters of the column, including the thickness, mass, wind bending moment, seismic bending moment, the hydrostatic pressure test and installation. The script has drawn in full proportion with the use of Auto-CAD. All the calculation is based on the national standards and the formulas. Though the check, all the sections of the design are satisfying the requirement. Keywords: mechanical design; Auto-CAD; distillation column.IntroductionDistillation is defined as: a process in which a liquid or vapor mixture of two or more substances is separated into its component fractions of desired purity, by the application and removal of heat. Distillation columns are made up of several components, each of which is used either to transfer heat energy or enhance material transfer [1-2]. The acceptance of present computer-aided design (CAD) systems is closely connected with their abilities to