Xmodem协议详解以及源代码.docVIP

研究Xmodem协议必看的11个问题 原文地址:/s/blog_4db10c6c0100av57.html~type=v5_onelabel=rela_prevarticle XModem 源码 #include crc16.h #define SOH 0x01 #define STX 0x02 #define EOT 0x04 #define ACK 0x06 #define NAK 0x15 #define CAN 0x18 #define CTRLZ 0x1A #define DLY_1S 1000 #define MAXRETRANS 25 static int last_error = 0; #include string.h void port_outbyte(unsigned char trychar) { unsigned char buf[2]; buf[0] = trychar; lowLevel_write(buf,1); } unsigned char port_inbyte(unsigned int time_out) { unsigned char ch; int i; last_error = 0; if(lowLevel_read(ch,1) == 1) return ch; last_error = 1; return ch; } static int check(int crc, const unsigned char *buf, int sz) { if (crc) { unsigned short crc = crc16_ccitt(buf, sz); unsigned short tcrc = (buf[sz]8)+buf[sz+1]; if (crc == tcrc) return 1; } else { int i; unsigned char cks = 0; for (i = 0; i sz; ++i) { cks += buf[i]; } if (cks == buf[sz]) return 1; } return 0; } static void flushinput(void) { //while (port_inbyte(((DLY_1S)*3)1) = 0) ; } int xmodemReceive(unsigned char *dest, int destsz) { unsigned char xbuff[1030]; unsigned char *p; int bufsz, crc = 0; unsigned char trychar = C; unsigned char packetno = 1; int i, c, len = 0; int retry, retrans = MAXRETRANS; for(;;) { for( retry = 0; retry 16; ++retry) { if (trychar) port_outbyte(trychar); c = port_inbyte((DLY_1S)1); if (last_error == 0) { switch (c) { case SOH: bufsz = 128; goto start_recv; case STX: bufsz = 1024; goto start_recv; case EOT: flushinput(); port_outbyte(ACK); return len; case CAN: c = port_inbyte(DLY_1S); if (c == CAN) { flushinput(); port_outbyte(ACK); return -1; } break; default: break; } } } if (trychar == C) { trychar = NAK; continue; } flushinput(); port_outbyte(CAN); port_outbyte(CAN); port_outbyte(CAN); return -2; start_re