深孔振动钻削装的设计.docVIP

更多相关文档资源请访问/lzj781219 完整CAD设计文件以及仿真建模文件，资料请联要 毕业设计说明书 深孔振动钻削装置的设计 学生姓名： 学号： 学 院： 专 业： 机械设计制造及其自动化 指导教师： 年 月 深孔振动钻削装置的设计 摘要：由于深孔加工是在封闭或半封闭的状况下进行，因此不能直接观察刀具的切削情况，切削热不易传散，而且排屑困难，工艺系统刚性差，切削效果不理想，特别是0.8mm以下，长径比大于10, IT7以上的精密深孔的加工，是目前国内外的技术难题。 本课题设计时，在对振动钻削和DF负压抽屑机理进行深入研究的基础上，设计深孔钻削装置 Deep hole vibration drilling device design Abstract: because of the deep hole processing in closed or semi-closed is conducted, and therefore cannot be directly observed the cutting tool, cutting, and scattered heat yi scraps discharge difficult, process system rigidity is poor, cutting the effect not ideal, especially 0.8 mm below, length-diameter ratio is more than 10, IT7 above precision deep hole processing, is the technical problems at home and abroad. This topic design, for vibration drilling and the mechanism of smoke crumbs DF negative pressure, thorough study on the basis of the deep hole design vibration drilling device, USES ordinary lathe with a assolenoid style vibrating device, assolenoid style vibrating device overcomes the deep hole processing broken bits scraps discharge difficult problems and improve deep hole processing quality and machining efficiency. Keywords: deep hole processing, the vibration cutting, DF system 目 录 1 引言······························································1 1．1本课题研究的目的和意义········································· 1 1. 2 国内外深孔振动钻削发展简况及深孔振动钻削的进展·················2 1．2．1 国内外深孔振动钻削发展简况··································2 1．2．2 深孔振动钻削的进展 ·········································5 1．3 低频深孔振动钻削存在的主要问题································ 7 1．4 本课题的来源及主要研究内容·····································7 1．5 对深孔振动钻削技术的展望······································10 2 振动钻削的断屑机理的研究·········································12 2．1 振动钻削的完全几何断屑机理····································12 2．1．1 振动切削为什么能断屑及断屑之充分条件·······················12 2．1．2 切屑的形成·················································13 2．2 力