蝶阀结构特征.docVIP

蝶阀结构特征 BUTTERFLY VALVE DESIGN FEATURES 系列蝶阀适用于食品、饮料、化工、工业环境水处理、高层建筑、给排水等管路做启闭（密封型）或调节介质流量之用。主要结构特点有： 结构简单、体积小、重量小、安装尺寸小。根据阀体连接形式可分为对夹式（包括凸耳对夹式），法兰连接和对焊连接三种基本连接方式。 密封材料有软、硬两种（放置在阀体或蝶板上），可用于各种不同的工况，且密封性能好，使用寿命长。 软密封结构适用于单偏心和双偏心结构的蝶阀，压力等级≤CLASS600 。（中线密封结构适用于压力等级≤CLASS250）密封圈（材料为PTEE）放置在阀体上具有以下特点： 不需要使用附加的密封圈或金属支撑圈即可可靠密封。 可保持双向的无泄漏的密封。 维修量少，寿命长。 多层次硬密封结构适用于单偏心、双偏心和三偏心结构的蝶阀，压力等级≤CLASS600，其中，三偏心蝶阀可保持双向无泄漏。多层次密封圈可采用不锈钢和非金属材料复合而成，其中非金属材料根据使用工况选用柔性石墨、PTEE或非石棉材料等。 弹性圈硬密封结构采用J型金属密封圈结构，适用于单偏心、双偏心结构的蝶阀，压力等级≤CLASS300，此结构本身具有防火结构，可适用于温度变化较大的场合，具有优良的密封性，寿命长、易加工制造。 防火设计的蝶阀可防止火灾事故的扩大，一旦蝶阀的密封阀座着火烧损后，不锈钢金属密封圈便发挥作用使蝶阀保持紧急密封。 蝶阀在完全开启的情况下，流阻较小，部分开启的情况下能进行灵敏的流量控制。 驱动力矩小、操作简单、迅速。 蝶阀结构特征 BUTTERFLY VALVE DESIGN FEATURES Butterfly valve are used to open and close (seal type) or adjust industrial water treatment, high-rise constructions, water supply and drainage etc. They are mainly structured as following: 1、Simple structure, small sizes, light weight and low installation dimensions. According to the types of body connection, they are basically classified to wafer type (including lug wafer type), flange and welded. 2、Sealing material may be soft or hard, placed on body or disc, to meet different working condition, and to effect good seal and long life. Soft sealing structure is applicable for single and double eccentric butterfly valves, pressure rating ≤CLASS 600. Centered sealing structure is applicable for pressure rating ≤CLASS 250. Sealing ring (PTEE) is placed on the valve body to feature the following: To effect dependable seal with no need of accessorial sealing ring or metal bracing ring. Bidirectional leakproof seal. Little maintenance and long service life. Multilayer hard seal structure is applicable for single, double and triple eccentric butterfly valves, pressure rating ≤CLASS 600. And, triple eccentric butterfly valve can maintain two-way leak-tightness. Multilayer sealing ring is composite of stainless steel and nonmetal material. The nonmetal material can be flexible graphi