nRF24L01写的无线温度发送部分.docVIP

#include reg52.h #include intrins.h typedef unsigned char uchar; typedef unsigned char uint; ///**********************************************************************//// sbit JD1=P2^5; sbit JD2=P2^6; sbit JD3=P2^7; sbit KG1=P1^7; sbit KG3=P3^2; sbit KG2=P3^3; sbit BEEF=P2^4; //**************************************************************************// unsigned int tt,hh; bit presence ; sbit LCD_RS = P2^0 ; sbit LCD_RW = P2^1 ; sbit LCD_EN = P2^2 ; uchar code cdis3[ ] = {Tem} ;//Temperature温度 uchar code cdis4[ ] = {Hum} ; //Humidity湿度 unsigned int tt,hh; unsigned char data temp_data[2] = {0x00,0x00} ; unsigned char data display[5] = {0x00,0x00,0x00,0x00,0x00} ; //unsigned char code ditab[16] = {0x00,0x01,0x01,0x02,0x03,0x03,0x04,0x04, // 0x05,0x06,0x06,0x07,0x08,0x08,0x09,0x09} ; //unsigned char code mytab[8] = {0x0C,0x12,0x12,0x0C,0x00,0x00,0x00,0x00} ; uchar TempBuffer_T[6],TempBuffer_H[6],T_set[6]; #define delayNOP() ; {_nop_() ;_nop_() ;_nop_() ;_nop_() ;} ; //*********************************** //DHT21温湿度传感器部分子程序模块 //*********************************** typedef unsigned char U8; /* defined for unsigned 8-bits integer variable 无符号8位整型变量 */ typedef signed char S8; /* defined for signed 8-bits integer variable 有符号8位整型变量 */ typedef unsigned int U16; /* defined for unsigned 16-bits integer variable 无符号16位整型变量 */ #define Data_0_time 4 //uint tem; //// //IO口定义区// //// sbit P1_1 = P1^6; // //// //定义区// //// U8 U8FLAG,k; U8 U8count,U8temp; U8 U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; U8 U8T_data_H_temp,U8T_data_L_temp,U8RH_data_H_temp,U8RH_data_L_temp,U8checkdata_temp; U8 U8comdata; U8 count, count_r=0; //****************************************NRF24L01端口定义*************************************** sbit MISO =P1^3; sbit MOSI =P1^4; sbit SCK =P1^2; sbit CE =P1^1; sbit CSN =P1^0; sbit IRQ =P1^5; uchar dispaly[8];