基于SolidWorks的冲裁模三标准件图库系统设计”word格式.docVIP

摘 要 本毕业设计课题，主要任务是。 关键词： Abstract The task of the graduation design is The 3D standard parts library system design of blanking die based on the Solidworks . The main task is to use the built-in VBA of Solidworks to create the program interface, write the required program, change the parameters of blanking die standard parts to create different parts, and establish the 3D standard parts library system. This article by analyzing the requirements of 3D standard parts library system design of blanking die , gives a more detailed about the development of the standard parts of blanking die , the development of CAD and its secondary development ,and the purpose and significance of this research. This paper designs to be similar parts required for the establishment of standard parts for structural analysis, build models refered to the actual objects, and makes a required database of standard parameters, then establish an overall analysis of the layout for the program interface, use the built-in VBA of Solidworks to create the program interface, write the required program, change the parameters of blanking die standard parts to generate the required parts of different size. This design of 3D standard parts library system of blanking die based on the Solidworks designs to change the parameters of standard parts of the program interface to generate the 3D standard parts of different size.Ten it omittes trouble drawing process to create three-dimensional diagram of the parts in a short period of time. This significantly improves production efficiency, and saves labor time. Keywords: Solidworks，Blanking Die，Standard parts library，Program，Parameter 目 录 摘 要 I Abstract II 1 绪 论 1 1.1冲裁模及其标准化的提出........................................................................1 1.1.1 国内冲压模具的发展现状及其发展方向....................................1 1.1.2 冲裁模的分类.................................................................................3 1.1.3冲裁模标准件参数化设计 4 1.2冲裁模CAD及其二次开发的发展状况 6 1