能量回馈式锂电池成系统的研究与实现.docVIP

摘要 锂电池化成工艺是锂电池生产中一个关键环节化成过程中的损耗，所以一种的能量回馈式很高市场价值。实现电池到高压母线之间的双向转换，从电网吸收回馈能量的平衡是研究的重点根据系统模块化设计，设计了一能够实现对低压单体锂电池进行大电流，并实现能量回馈电网的锂电池化成系统主要： 分析锂电池化成系统的基本结构，的锂电池化成设计设备性能，本设计的主要技术指标。化成系统根据功能分为三大主要模块：充放电模块、和控制模块各模块的方案进行对比研究，锂电池化成系统的设计。 锂电池化成系统硬件模态分析法，充放电模块模块电路工作原理进行详细分析计算了主要功率器件驱动电路的参数，PSIM仿真软件对主电路工作原理和设计参数进行仿真验证，参数修改优化。 完成了充放电模块和的算法的设计，充放电模块的控制结构、协议，单周期控制算法一种功率前馈控制的能量平衡算法实现过程的和流动制。 一台实验样机，对样机的实际测试，获得充放电模块工作模式下的波形，对充放电参数，整机效率，、电流等参数进行测量，分析工作模式状态能量平衡的效果。 ：化，，，能量平衡 Abstract Lithium battery formation process is a key link in production process of lithium battery, in the formation process, large electric energy bidirectional conversion, the traditional formation of electrical equipment due to a large amount of electric energy loss. Therefore, the design of a highly efficient energy feedback type lithium battery formation system has very high market value. Battery low voltage to high voltage bus between high ratio of bidirectional conversion, and absorbed from power grid and contribute to the energy balance of the algorithm is the focus of the study. The system based on modular design method, design the A to realize high current charge and discharge of low voltage single lithium battery power, and realize the excess energy feedback power lithium battery formation system. The main research contents are as follows: Analyzing the basic structure of lithium battery formation system, performance comparison of existing lithium battery equipment design, gives the design of the main technical indicators. Will turn into the system according to the function is divided into three main modules: charge and discharge modules, PWM rectifier module and control module. The comparative study of each module of the scheme, put forward the overall design scheme of energy feedback type lithium battery system. The hardware circuit of the design of the energy feedback type lithium battery formation system and use the modal analysis method and the method of equivalent circuit switch, to charge and dis