辽宁石油化工大学9号教学楼建筑结构设计可提供完整计图纸.doc

辽宁石油化工大学9号教学楼建筑结构设计 摘 要 摘 要：本设计为辽宁石油化工大学教学楼建筑结构设计，本设计为框架结构。本设计包括两部分内容，第一部分为建筑设计，第二部分为结构设计。在建筑设计中，主体部分共五层，其层高均为3.6m，主体部分的总高为18.95 m。本设计总长度为73.42m，总建筑面积为6736m。主楼总建筑面积为5492.75。楼内设有三处楼梯，符合防火规范和人群疏散要求。在结构设计中，采用柱下独立基础，基础埋深为1.3 m。主体和附属两部分设有抗震缝和伸缩缝二缝合一，并在主体部分设有后浇带。主体和附属两部分设有抗震缝和伸缩缝二缝合一，并在主体部分设有后浇带。并进行初定梁、柱截面尺寸，楼板的厚度。结构方案确定后，对主体部分分别进行了重力荷载计算、框架梁和框架柱的线刚度计算、横向水平地震作用下和竖向荷载作用下的内力计算、并且进行最不利组合，以及梁、板、柱、楼梯、雨篷和基础配筋计算并绘图。 关键词：教学楼；框架结构；内力组合；截面设计 The architectural and structural design of liaoning shihua University the 9th of teaching building Abstract The architectural and structural design is about the ninth university teaching building in Liaoning shihua University. The building is reinforced concrete framework .The design includes two parts, the first for the architectural, structural design into the second. In architectural design, the main part of a total five levels, and the height of all the floor is 3.6m The main part of the total high is the 18.95 m.Subsidiary part of a total is five layers,and the first three layers of height is 3.3 m, and the fourth and fifth of the height is 3.9 m, also the height of the subsidiary for 18.95 m. The building, a total length of 73.42 m, a total construction area of 6,736 square meters. Taking into account factors such as lighting and ventilation, the building is L font in the form of graphic design gallery-style. The building has three staircases, in line with fire safety norms and requirements of crowd dispersal. In structural design, under the independent-use basis, it is based on the depth of 1.40 m. The main and subsidiary part have a gap with a seismic joints and joints of a suture, and in the main part of a post-pouring zone.In structural design, first, determined initial beams, columns section size and thickness of the floor.Second, after structure of the programme identified, conducted internal force calculation such as gravity load, the frame beams and framework, in line stiffness, the level of horizontal and vertical earthquake un