劳动安全卫生法施行令-JapaneseLawTranslation.DOCVIP

Order for Enforcement of Industrial Safety and Health Act (Cabinet Order No. 318 of August 19, 1972) (Definition) Article 1 For purposes of this Cabinet Order, the meanings of the terms listed in the following items are as defined in those items: (i) the term acetylene welding equipment means equipment comprising acetylene generators, safety devices, distributing tubes, blowpipes, etc. and welding, cutting or heating metals by means of acetylene and oxygen other than dissolved acetylene. (ii) the term gas welding equipment using manifold means equipment comprising gas manifolds (meaning the equipment comprising 10 or more containers of flammable gases (meaning the gases listed in item (5) of Appended Table 1 ; hereinafter the same) connected to each other with distributing tubes or the equipment comprising 9 or less containers of flammable gases connected to each other with distributing tubes, and the total internal volumes of the said containers are 400 liters or more for hydrogen or dissolved acetylene, and also 1,000 liters or more for other flammable gases), safety devices, pressure regulators, distributing tubes, blow pipes, etc., and welding, cutting or heating metals by means of flammable gases and oxygen. (iii) the term boiler means a steam boiler or a hot water boiler other than boilers listed below: (a) Steam boilers used at a gauge pressure of 0.1 MPa or less with a heating surface area calculated as provided for by the Ordinance of the Ministry of Health, Labour and Welfare (hereinafter referred to as heating surface area) of 0.5 m2 or less or with a drum having an inner diameter of 200 mm or less and a length of 400 mm or less; (b) Steam boilers used at a gauge pressure of 0.3 MPa or less with an internal cubic volume of 0.0003 m3 or less; (c) Steam boilers with a heating surface area of 2 m2 or less fitted with a steam pipe having an inner diameter of 25 mm or more open to the atmosphere, or fitted with a U-shaped vertical pipe having a gauge pressure