FOD(IN)-30-FM1-慢车启动前检查报告(无脚手架安装版).docVIP

FOD(IN)-30-FM1 version 6 Scaffold-Less/无脚手架适用Pre-Start UP Checklist慢车启动前检查报告Contract Number合同号： Project Name项目名称：沙坪坝区档案业务用房Project Address项目地址：沙坪坝区梨树湾H5-6/02Installation Supervisor安装监督：Installation Subcontractor安装单位：重庆怡快电梯有限公司Product Type梯型：Gen2-comfortElevator Capacity载重：1000kgSpeed速度：1.6m/sNumber of Floors/Stops层/站：7/7/7Summary检查结果Times检查次数Total Items检查总项数Qualified Items合格项数Not Applicable不适用项数Unqualified Items不合格项数First Ins.第一次Second Ins.第二次Score (points) 安装班组最终成绩_______ 分Submitting Date报告日期：2018年7月2Acceptance Date接收日期：Installation Signature安装负责签字：Adjuster Confirmation/Signature调试员确认/签字：Agent Distributor Signature（Subcontract Only）经销商确认：（仅调试合同）Pre-Start up Checklist慢车启动前检查报告FOD(IN)-30-FM1 version 6 Scaffold-Less/无脚手架适用Explanation填写说明此报告为慢车调试前检查报告，共计38项检查内容，具体施工负责人申请慢车调试前，用此表逐项自检，根据自检结果在“□”行勾选。This Checklist should be filled up before car runs in inspection. Before sending application for start-up, leader of installer should make self-inspection on all the items, and tick off on boxes “□”with Y/N, N/A/not available.3S情况不满足不能进场工作Adjuster cannot get into the site before 3S is confirmed safe.调试员到工地后再根据此报告逐项检查、确认现场的实际情况， 在“□”行勾选。将复查的实际的合格项目数与不合格数填入首页的“检查结果”表格中，如果有不合格项，不允许进入慢车调试。安装班组最终成绩=（1- 第一次检查不合格项数+第二次检查不合格项数检查项总数（不含不适用项）An adjuster confirms each actual result and ticks off the boxes “□” with “Y, N, N/A” while he arrives at site. The summary of confirmation should be filled in “Summary” located on the cover page based on the actual. It is not allowed to go to start-up step with any of defects.Final Score= (1- 1st unqualified+2nd unqualified Total items 其他未列入其中的问题必须填写在第7页的《附表》中，包括整改建议，整改后结果，由调试员填写。Other items not included in the list should be put in “attachment” of page 7 by adjuster with description, advice and result confirmation运行后，为了保证安装工在一个安全的条件下工作，调试员需要亲自进行“动车后安全检查项”，确认无误方可交付安装班组继续安装。To ensure the installer can work in safe condition in coming period, after car starting up, adjustor must c